On Approval of the Subsidy Rules for Reimbursement of a Part of the Expenses Incurred by an Agro-Industrial Complex Entity, in the Context of Investments

Unofficial translation

In accordance with subparagraph 15) of paragraph 1 of Article 6 of the Law of the Republic of Kazakhstan "On state regulation of development of agro-industrial complex and rural territories", subparagraph 2) of paragraph 3 of Article 16 of the Law of the Republic of Kazakhstan "On State Statistics" and subparagraph 1) of article 10 of the Law of the Republic of Kazakhstan "On State Services", I HEREBY ORDER:

Footnote. The preamble as amended by the order of the Minister of Agriculture of the Republic of Kazakhstan dated 29.11.2023 № 409 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

1. That the attached Subsidy Rules for Reimbursement of a Part of the Expenses Incurred by an Agro-Industrial Complex Entity, in the Context of Investments (hereinafter referred to as the Rules) shall be approved.

2. The following orders shall be declared to be no longer in force:

1) Order of the Deputy Prime Minister of the Republic of Kazakhstan - Minister of Agriculture of the Republic of Kazakhstan № 48 dated February 1, 2017 “On Approval of the Subsidy Rules for Reimbursement of a Part of Expenses Incurred by an Agro-Industrial Complex Entity in the Context of Investments” (registered in the Register of State Registration of Regulatory Legal Acts under № 14816 , published on March 7, 2017 in the Reference Control Bank of Regulatory Legal Acts of the Republic of Kazakhstan);

2) Order of the Deputy Prime Minister of the Republic of Kazakhstan - Minister of Agriculture of the Republic of Kazakhstan № 473 of November 28, 2017 “On Introduction of Amendments to Order of the Deputy Prime Minister of the Republic of Kazakhstan - Minister of Agriculture of the Republic of Kazakhstan № 48 of February 1, 2017 “On Approval of the Subsidy Rules on Reimbursement of a Part of the Expenses Incurred by an Agro-Industrial Complex Entity in the Context of Investments ”(registered in the Register of State Registration of Regulatory Legal Acts under № 16091, published on December 15, 2017 in the Reference Control Bank of Regulatory Legal Acts of the Republic of Kazakhstan).

3. In accordance with the procedure established by legislation, the Department of Investment Policy of the Ministry of Agriculture of the Republic of Kazakhstan shall ensure:

1) state registration of this order with the Ministry of Justice of the Republic of Kazakhstan;

2) within ten calendar days from the date of state registration of this order, sending a copy hereof in paper and electronic form both in Kazakh and Russian languages to Republican State Enterprise on the Right of Economic Management “Republican Center of Legal Information” for official publication and inclusion into the Reference Control Bank of Regulatory Legal Acts of the Republic of Kazakhstan;

3) within ten calendar days after the state registration of this order, sending a copy hereof for official publication in periodicals;

4) placing this order on the Internet resource of the Ministry of Agriculture of the Republic of Kazakhstan after its official publication.

3. Control over the implementation of this order shall be entrusted to the supervising Vice Minister of Agriculture of the Republic of Kazakhstan.

4. This order shall enter into force upon the expiration of ten calendar days after the day of its first official publication, with the exception of part three of paragraph 16 of the Rules, which shall come into effect on January 1, 2019.

Acting
Minister of Agriculture
of the Republic of Kazakhstan

A. Yevniyev

"AGREED"
Minister of Information and Communications
of the Republic of Kazakhstan
______________ D. Abayev
of "____" ____________ 2018

"AGREED"
Minister for Investments and Development
of the Republic of Kazakhstan
______________ Zh. Kassymbek
of "____" ____________ 2018

"AGREED"
Acting
Minister of Finance of the
Republic of Kazakhstan
______________ B. Sholpankulov
of "____" __________ 2018

"AGREED"
Acting
Minister of National Economy
of the Republic of Kazakhstan
______________ R. Dalenov
of "____" ____________ 2018

Approved
by Order of the Acting
Minister of Agriculture of the
Republic of Kazakhstan
dated July 23, 2018 № 317

Rules of subsidizing on compensation of a part of expenses incurred by the subject of agro-industrial complex in case of investments

Footnote. The Rules preamble as amended by the order of the Minister of Agriculture of the Republic of Kazakhstan dated 29.11.2023 № 409 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

Chapter 1. General provisions

1. These Rules of subsidizing on compensation of a part of expenses incurred by the subject of agro-industrial complex in case of investments (hereinafter referred to as the Rules) have been developed in accordance with subparagraph 15) of paragraph 1 of article 6 of the Law of the Republic of Kazakhstan "On state regulation of development of agro-industrial complex and rural territories" (hereinafter referred to as the Law), subparagraph 2) of paragraph 3 of Article 16 of the Law of the Republic of Kazakhstan "On State Statistics" and subparagraph 1) of article 10 of the Law of the Republic of Kazakhstan "On State Services" (hereinafter referred to as the Law on state services) and shall determine the procedure for subsidizing on compensation of a part of expenses incurred by the subject of agro-industrial complex (hereinafter referred to as the AIC), in case of investments.

2. The main purpose of subsidizing on compensation of a part за expenses incurred by the AIC subject, in case of investments, is to increase the availability of goods, works and services as part of the implementation of investment projects in priority areas (sectors) of AIC by reducing capital intensity and increasing the return on investment.

The following terms and definitions shall be used in these Rules:

1) investment project in the AIC (hereinafter referred to as the investment project) – a set of measures that provides for investments in the creation of new, reconstruction, expansion of production facilities, acquisition of vehicles, machinery and equipment in accordance with project passports;

2) investor in the AIC (hereinafter referred to as the investor (service recipient)) – a business entity, carrying out investments and engaged in the production and (or) processing of agricultural products, the main or secondary type of activity of which belongs to the sections of the Common Classifier of Economic Activity (hereinafter referred to as the ССEA) according to the list of the main or secondary type of activity for the business entity making investments and engaged in the production and (or) processing of agricultural products provided for in Annex 1 to these Rules;

3) special account – special account - an account of a financial institution in a second-tier bank, to which the amounts of investment subsidies are credited in accordance with the conditions of Chapter 4 of these Rules;

4) agricultural equipment (hereinafter referred to as the equipment) – equipment designed for mechanization, electrification and automation of agricultural work, which, due to the specifics of its operation, is characterized by the immobility of the base and body structural elements, relative to the supporting surface, during the execution of technological processes;

5) agricultural machine (hereinafter referred to as the machine) – self-propelled agricultural machinery, trailed and mounted implements intended for the mechanization of agricultural work (in farming and animal husbandry), which is characterized by the mobility of the base and body elements, relative to the supporting surface, during the execution of technological processes;

6) agricultural machinery (hereinafter referred to as the machinery) – a wide range of technical means designed to increase labor productivity in agriculture by mechanization, electrification and automation of individual operations or processes;

7) the administrator of the budget program (hereinafter referred to as the administrator) – local executive bodies of regions, cities of republican significance, capital;

8) creation of new production capacities – construction of buildings, industrial structures and equipping them with vehicles, machinery, equipment in accordance with the list of project passports provided for in Appendix 2 to these Rules;

9) personal account - a set of entries contained in the register, allowing to identify a registered person to register applications for subsidies and record transactions on them;

10) project passport – a list and share of reimbursement of investments for the creation of new, reconstruction, expansion of production facilities, acquisition of new, previously unused vehicles, machinery, equipment and other fixed assets, works and services subject to investment subsidies, specified in Annexes 2 and 3 to these Rules;

11) expansion of existing production facilities – measures providing for the construction of additional production facilities at an existing facility, equipping existing production facilities with missing or necessary new, previously unused equipment, vehicles and machinery in accordance with Annex 3 to these Rules;

12) investments – costs aimed at creating new or expanding existing production facilities;

13) investment subsidies − reimbursement of part of the expenses incurred by the investor (service recipient) during investment investments;

14) the working body for investment subsidies (hereinafter referred to as the working body (service provider) – local executive body of regions, cities of republican significance and the capital in the field of agriculture, authorized to consider applications from investors (service recipients) and make decisions on payment/refusal to provide investment subsidies;

14-1) objects of investment subsidies - machinery, equipment, vehicles acquired on credit/leasing, for which investment subsidies shall be carried out by applying the mechanism of transferring investment subsidies as an advance payment to a financial institution’s special account in accordance with Chapter 4 of these Rules;

15) investment subsidizing agreement – an agreement concluded between the working body (service provider) and the investor (service recipient), providing for the procedure and conditions for the transfer of investment subsidy funds, the course of monitoring, the responsibility of the parties and other conditions;

16) financial institutions – joint-stock company “Industrial Development Fund” (within the framework of investment subsidies for investment deposits at the expense of attracted funds) (hereinafter – JSC “Industrial Development Fund”), second-tier banks, microfinance organizations, credit organizations having the appropriate license for the right to carry out banking operations, leasing companies, credit partnerships, attorneys (agents) determined in accordance with the budget legislation of the Republic of Kazakhstan;

17) production complex – a set of interconnected production facilities (buildings, structures, installed equipment, engineering networks) aimed at the production, processing, storage, and packaging of agricultural products;

18) production facility – maximum output of agricultural products and/or food products of a production facility in physical terms per unit of time (hour, day, month, year);

19) application – an electronic application for the receipt by investors (service recipients) of investment subsidies for investment in the form in accordance with Annexes 4, 5 to these Rules;

20) reconstruction – construction, reconstruction and (or) expansion and (or) change of purpose of facilities in accordance with Annex 3 to these Rules;

21) state information system for subsidizing (hereinafter referred to as the SISS) – an organizationally ordered set of information and communication technologies, service personnel and technical documentation, designed to provide services for the implementation of subsidy processes, which provides the ability to register an application for subsidies, as well as its processing through automatic verification of the application for compliance with the conditions of subsidies;

22) electronic register of applications for subsidies (hereinafter referred to as the register) – a set of information about applications for subsidizing the agro-industrial complex, as well as about borrowers, financial institutions, and other information reflected in the SISS;

23) web portal of the state information system for subsidizing (hereinafter referred to as the web-portal) – an Internet resource hosted on the Internet, providing access to the state information system for subsidizing;

24) electronic digital signature (hereinafter referred to as the EDS) – a set of electronic digital symbols created using an electronic digital signature and confirming the authenticity of an electronic document, its ownership and the invariance of the content.

Footnote. Paragraph 2 as amended by Orders of the Minister of Agriculture of the Republic of Kazakhstan dated 13.02.2025 № 49 (effective ten calendar days after the date of its first official publication); dated 13.06.2025 № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

3. Subsidizing the costs of construction and installation work shall be carried out on investment projects that provide for the achievement of indicators of output and / or productivity and / or product sales volumes and / or capacity utilization in accordance with the business plan of the project.

At the same time, as part of the creation of new or expansion of existing production facilities, investment subsidies for the reconstruction of the facility shall be allowed in accordance with the project passports specified in Annex 3 to these Rules.

In the event that the investment project provides only for the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subsidized within the limits of the established maximum allowable cost for the calculation of subsidies for expansion per unit of capacity and the share of reimbursement of investment investments from the cost of equipment under agreements of sale (lease), agreements of supply and (or) installation of equipment, as well as related documents (customs declaration, invoices, documents confirming payment).

Note!
Item four of paragraph 3 shall be valid till 01.01.2027 in accordance with the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160.

Subsidies under positions 1.1, 13.1, 29.1, 29.2.1 of project passport № 1 “Acquisition of agricultural machinery, machinery and equipment” shall be provided only if there is an industrial assembly agreement for the brand of agricultural machinery.

The existence of an industrial assembly agreement for the brand of agricultural machinery shall be confirmed by the manufacturer of agricultural machinery.

Footnote. Paragraph 3 as amended by the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160 (shall be enforced upon expiry of ten calendar days after its first official publication).

4. Every year, before February 1 of the corresponding year, the working body (service provider) shall create and register in the SISS a group of specialists (hereinafter referred to as the group of specialists) from among the employees of the working body (service provider), local executive bodies (including district/city) and other organizations, being representatives of public and non-governmental sectoral organizations.

When inspecting facilities according to project passports that provide for the creation of new ones, reconstruction, expansion of production capacities, the group of specialists shall include specialists from the department of construction, urban planning and architecture of local executive bodies of regions, cities of republican significance, the capital.

If the investment project exclusively involves the acquisition of equipment with state registration within the framework of project passports № 1 and № 1.1, then an inspection of the investor’s (service recipient’s) facility by a group of specialists shall not be required.

For other investment projects, a group of specialists in all project passports, except for the cases specified in part three of this paragraph, shall check documents, inspect the investor’s (service recipient) facility, purchased equipment for compliance with the conditions stipulated in the project passports, with the obligatory attachment of supporting photos and video materials, also check the availability of installed equipment, achievement of the capacity utilization.

Verification of achievement of the capacity utilization shall be carried out according to project passports specified in paragraph 16 of these Rules.

At least 2 (two) specialists shall be sent to each facility, which will be determined by the working body (service provider).

The inspection shall be carried out in the presence of the investor (service recipient) or his authorized representative, and its result shall be documented by an act of inspection of the investor’s facility and confirmation of the achievement of the capacity utilization in the form in accordance with Annex 6 to these Rules (hereinafter referred to as the act of inspection of the facility).

5. Persons who are members of a group of specialists in accordance with paragraph 4 of these Rules shall have permanent access to SISS, except for cases where these persons have limited access to SISS due to being on vacation, a business trip, during a period of temporary disability, or dismissal. Restriction of access to SISS shall be confirmed by a note of restriction of access of a member of a group of specialists in the state information system for subsidies in the form according to Annex 7 to these Rules.

6. Investment subsidies are combined with other measures of state support, except for measures providing for cost recovery for investment investments.

Investment subsidies are not eligible for organizations whose fifty or more percent of shares (stakes in the authorized capital) are directly or indirectly owned by the state, national management holding, national holding, national company.

The requirement specified in part two of this paragraph shall not apply to cases of subsidizing an investor (service recipient) when he purchases vehicles, machinery and equipment on lease using the mechanism of transferring investment subsidies as an advance payment to a financial institution to a special account in accordance with Chapter 4 of these Rules.

7. Investment subsidies shall not be provided to investors (service recipients) in respect of whom liquidation, rehabilitation or bankruptcy procedures have been initiated, as well as whose activities have been suspended in accordance with the Law of the Republic of Kazakhstan “On Rehabilitation and Bankruptcy” (hereinafter referred to as the Law on rehabilitation and bankruptcy).

Chapter 2. Basic conditions of investment subsidies

8. Investment subsidies shall be implemented according to the project passports specified in Annex 3 to these Rules, and shall be carried out at the place of implementation of the investment project.

The list of basic requirements for the provision of the state service "Subsidizing the reimbursement of part of the costs incurred by the subject of the agro-industrial complex with investments" shall be set out in Annex 8 to these Rules (hereinafter referred to as the List of basic requirements for the provision of state services).

9. Investment subsidies shall be provided for investment projects put into operation no earlier than three years before the year of filing the electronic application for subsidies. At the same time, subsidizing shall be subject to new, previously unused vehicles, machinery or equipment, the year of manufacture no earlier than three years before the date of commissioning of the investment project.

The investor attaches to the application for investment subsidies the act of commissioning of the investment project, under which the acquisition of machinery, equipment and/or equipment has been carried out.

When calculating the amount of investment subsidies, the production capacity of new, previously unused equipment that meets the conditions of this paragraph, shall apply.

10. If, according to the project passports, the acquisition of exclusively vehicles, machinery and/or equipment is assumed, then new, previously unused vehicles, machinery and/or equipment, the year of manufacture and purchased no earlier than 3 (three) years before the year of application, shall be subject to subsidization.

Subsidizing of vehicles, machinery and equipment specified in project passport № 1.1 shall be carried out in accordance with the list of priority agricultural machinery and equipment (hereinafter referred to as the List). The list is provided by the authorized body in the field of state support of industrial activities no later than December 1 of the current year for the next year and no later than July 1 for the corresponding year. Within 3 (three) working days after receipt, the List shall be posted by the authorized body in the field of development of the agro-industrial complex in SISS.

At the same time, in the absence of the declared model of equipment and machinery in the List, subsidies shall be carried out according to project passport № 1.

11. For project passports № 1 (if there is a minimum standard for livestock), № 4, № 6 it is necessary for the investor (service recipient) to have an appropriate number of conventional cattle heads, which shall be confirmed as a result of information interaction between the subsidy information system and the database for identifying farm animals.

In case of submitting an application from an agricultural cooperative, the total number of breeding stock of farm animals registered with members of the agricultural cooperative shall be taken into account.

The coefficients for converting the livestock of farm animals into conventional cattle heads, which are indicated in the project passports, shall be carried out in accordance with Annex 9 to these Rules.

12. For project passports № 1 (if there is a minimum standard for land plots), № 2, № 4, № 13, № 14, the investor (service recipient) must have agricultural land plot(s) on the right of land use and (or) private ownership of the corresponding area, confirmed as a result of information interaction between the state information system of real estate and the information system of the unified state real estate cadastre.

In the case of an application submitted by an agricultural cooperative, the total area of agricultural land plots registered with members of the agricultural cooperative shall be taken into account.

In this case, membership in an agricultural cooperative shall be confirmed through information interaction between the state information subsidy system (SISS) and the state database “Legal entities”.

In the case of submitting an application under project passports № 1, № 2, № 4, № 13, and № 14 by a peasant or farm enterprise operating as a joint venture, whose members have registered land plots, it is permitted to provide a subsidy for the machinery and/or equipment acquired and registered in the name of a member of the peasant or farm enterprise.

Membership in the peasant or farm enterprise shall be confirmed by verification with the data of the Committee of State Revenues of the Ministry of Finance of the Republic of Kazakhstan.

Footnote. Paragraph 12 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025 № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

13. Investment subsidies shall be implemented if the application meets the project passports specified in Annex 3 to these Rules, as well as the requirements of these Rules.

14. Confirmation of purchased goods, works and services by electronic invoices shall be carried out through the electronic invoice information system (except for preferential financing programs provided without co-financing from the investor (service recipient) through subsidiaries and affiliated companies of the national management holding in the field of agro-industrial complex). Expenditures made before January 1, 2020 shall be confirmed by paper invoices.

When an agricultural commodity producer (agricultural cooperative) acquires vehicles, machinery and/or equipment directly from a foreign manufacturer that does not use the electronic invoice information system, the acquisition costs shall be confirmed by a customs declaration for goods (from third countries that are not members of the Eurasian Economic Union) or a statement (statements) on importation of goods and payment of indirect taxes with a stamp of the tax authority in accordance with paragraph 2 of Article 456 of the Code of the Republic of Kazakhstan "On Taxes and other obligatory payments to the budget" (Tax Code) (hereinafter referred to as the Tax Code) (from the territory of member states of the Eurasian Economic Union).

14-1. In case of non-receipt of subsidies by the investor (service recipient) (in case of non-use of electronic invoice for receiving state support measures), upon request of the investor (service recipient), the working body (service provider) shall unblock electronic invoices via SISS within 5 (five) working days.

Footnote. The Rules have been supplemented by paragraph 14-1 in accordance with the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160 (shall be enforced upon expiry of ten calendar days after its first official publication).

15. Investment subsidies shall be paid after commissioning of new, reconstruction, expansion of production facilities and/or acquisition of vehicles, machinery and equipment, except as provided for in paragraph 32 of these Rules. In case of implementation of the investment project by introducing a stage or start-up complex, subsidizing of the stage or start-up complex shall be carried out.

At the same time, subsidizing of costs as a part of reconstruction of production facilities shall be carried out not more often than once in 5 (five) calendar years.

16. Investment subsidies shall be calculated on the basis of actual investments made. The percentage (hereinafter referred to as the %) of reimbursement of costs is set in accordance with the share of reimbursement stipulated in the project passports.

For project passports № 7, № 8 (for milk processing plant), № 10, № 19, № 24, № 25, № 26, № 27, № 27.1, № 28, № 29 for creation of new production facilities, investment subsidies shall be paid in two tranches:

1) the first tranche in the amount of 50 (fifty) % of the total amount of investment subsidies after commissioning of the facility;

2) the second tranche in the amount of 50 (fifty) % of the total amount of investment subsidies after achieving production volumes of at least 50 (fifty) % of the total production capacity within the terms stipulated by the business plan.

If an investment project reaches a production volume of 50 (fifty) percent or more of the total production capacity at the time of application, investment grants shall be paid in one installment.

17. Based on applications for the current financial year, if funds are available for the payment of investment subsidies from the local budget in the current financial year, an increase in the share of reimbursement of investment deposits for the following project passports may be permitted by the administrator's decision:

up to 50 (fifty)%:

according to the project passport № 1 “Acquisition of agricultural machinery, machines and equipment” for agricultural cooperatives for the following positions: 2; 13.2; 14; 19; 25; 26; 28; 29; 30; 31; 36; 40; 42;

according to the project passport № 1.1 “Acquisition of priority agricultural machinery and equipment” for agricultural cooperatives for the following positions: 1; 2; 5; 6; 7; 8; 10; 11;

according to project passport № 8 “Establishment and expansion of a milk processing facility, Establishment of milk collection points, acquisition of equipment and machinery for agricultural cooperatives, procurement organizations, milk collection points and milk processing enterprises” for agricultural cooperatives.

At the same time, one agricultural cooperative can receive investment subsidies for acquired (purchased) machinery, vehicles and equipment, up to:

three tractors with the corresponding number of trailed and mounted equipment;

two grain harvesters and the corresponding number of mounted and trailed equipment;

two vehicles for transporting agricultural goods and a dump trailer.

For agricultural cooperatives, the requirement for a minimum standard per unit of equipment (hectare/basic cattle unit) does not apply.

Footnote. Paragraph 17 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

18. The size of investment subsidy shall be determined according to the following formula:

А = B х C,

where:

А – the amount of investment subsidies;

B – the amount of actual investment or the maximum allowable cost for calculating subsidies indicated in the project passports (if the actual investment exceeds the maximum allowable value for calculating subsidies);

C – the share of reimbursement of investments in percentage terms, indicated in the project passports.

For project passports that provide for subsidies per unit of measurement, the amount of subsidies is determined by the following formula:

А = (B х C) х D,

where:

А – the amount of investment subsidies;

B – the amount of actual investment or the maximum allowable value for calculating subsidies indicated in the project passports (if the actual investment exceeds the maximum allowable value for calculating subsidies);

C – the share of reimbursement of investments in percentage terms, indicated in the project passports;

D – a unit of measurement specified in project passports.

For AIC subjects that are registered for value added tax (hereinafter referred to as the VAT), the calculation of the amount of subsidies shall be made based on the amount of investments, reduced by the amount of VAT taken as an offset for them.

19. Applications are accepted at the place of implementation of the investment project from February 1 to December 15 (inclusive) of the corresponding year.

According to the project passport № 4 "Creation of infrastructure for watering pastures and providing water to livestock farms (wells, boreholes)", applications shall be accepted at the place of implementation of the investment project from April 1 to October 1 (inclusive) of the corresponding year.

Applications shall be considered in turn according to the date and time of receipt of applications.

20. If the investor (service recipient) uses his own funds, the amount of investment subsidies shall be transferred by the working body (service provider) to the current account of the investor (service recipient).

When purchasing machinery, vehicles, equipment and other facilities on credit/leasing, investment subsidies, shall be transferred to a financial institution to repay the principal debt of the investor (service recipient).

For AIC subjects receiving investment subsidies, the counter obligation will be to provide statistical reporting starting from 2020 on fixed capital investment in agriculture and food production.

Footnote. Paragraph 20 as amended by the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160 (shall be enforced upon expiry of ten calendar days after its first official publication).

21. The application for investment subsidy shall be submitted electronically through the e-government web portal and registered in SISS.

Information interaction between the web portal of "e-government" and SISS shall be carried out in accordance with Article 43 of the Law of the Republic of Kazakhstan "On Informatization".

Availability of a personal account of the investor (service recipient) in SISS shall be confirmed as a result of information interaction between SISS and the state databases "Legal Entities" or "Natural Persons".

Chapter 3. Procedure for receiving and reviewing applications for investment subsidies in electronic form

22. To receive the decision of the working body (service provider), the investor (service recipient) shall submit through the "e-government" web portal an electronic application for investment subsidization in the form according to Annex 4 to these Rules, signed by the EDS of the investor (service recipient), attached with the required documents specified in the application in the "PDF (Portable Document Format)" format (a scanned copy of the paper version signed and sealed (if available) by the investor (service recipient)).

In this case, the working body (service provider) shall make a decision on compliance/non-compliance of the investment project with the conditions of these Rules within 2 (two) working days from the date of registration of the application.

The investor (service recipient) shall be sent a note on the decision of the working body (service provider) on compliance/non-compliance of the investment project in the form according to Annex 10 to these Rules and a note on the decision of the working body (service provider) on payment/rejection of investment subsidies on the project passport in the form according to Annex 11 to these Rules in the form of an electronic document signed by the EDS of the working body (service provider).

The notification shall be sent to the e-mail address specified by the investor (service recipient) when registering with SISS, as well as to the "personal account" in SISS.

The working body (service provider) shall ensure the entry of data into the information system for monitoring the provision of state services on the stage of provision of state services in accordance with subparagraph 11) of paragraph 2 of Article 5, paragraph 2 of the Law on state services.

23. To receive subsidies, the investor (service recipient) shall submit an application for investment subsidies in the form according to Annex 4 to these Rules, attaching the following supporting, title and/or registration documents in electronic format "PDF (Portable Document Format)" (scanned copy of the paper version signed and sealed (if any) by the investor (service recipient)):

1) copies of the act of acceptance of the facility of the investment project into operation (in case of creation of new production facilities or expansion of the existing ones) or the act of commissioning of a start-up complex or a phase of the investment project (in cases specified in paragraph 15 of these Rules) in accordance with the form of the act of acceptance of the facility into operation approved by the order of the Minister for Investment and Development of the Republic of Kazakhstan dated April 24, 2017 № 234 (registered in the Register of state registration of regulatory legal acts № 15141) (hereinafter referred to as the form of commissioning act), as well as in accordance with paragraph 2 of Article 73 of the Law of the Republic of Kazakhstan "On architectural, urban planning and construction activity in the Republic of Kazakhstan" (hereinafter referred to as the Law on architectural, urban planning and construction activity);

2) copies of the equipment commissioning act between the buyer and the supplier (if the equipment is purchased);

3) copies of sales agreements, electronic and/or paper invoices (except for preferential financing programs provided without co-financing from the investor (service recipient) through subsidiaries and affiliates of the national management holding in the agro-industrial complex) for purchased goods, works, services, confirming investment in the creation of new or expansion of existing production facilities, documents confirming payment;

4) copies of design and estimate documentation with a positive conclusion of project expertise in accordance with Article 60 and Chapter 9-1 of the Law on architectural, urban planning and construction activities (for project passports for which subsidies are provided in accordance with the design and estimate documentation);

5) copies of acts of acceptance and transfer of vehicles, machinery, equipment;

6) copies of loan/leasing agreements certified by a financial institution in case of investment at the expense of borrowed funds in financial institutions;

7) in case of application for the second tranche in accordance with subparagraph 2) of paragraph 16 of these Rules, the investor (service recipient) shall attach supporting documents in electronic format "PDF (Portable Document Format)" (scanned copy of the paper version):

business plan;

electronic invoices for the sale of finished products;

8) copies of the certificate of VAT registration (for AIC subjects registered under the VAT (for AIC subjects registered under the VAT).

9) according to project passport № 4, an additional copy of the permit for special water use obtained in accordance with the Rules for the provision of the public service "Permit for special water use", approved by the order of the Acting Minister of Ecology, Geology and Natural Resources of the Republic of Kazakhstan dated September 11, 2020 № 216 "On approval of the rules for the provision of public services in the field of regulation of the water fund use" (registered in the Register of state registration of regulatory legal acts № 21194);

10) additionally, for project passport № 4:

copy of the document confirming the state registration of rights to the water management facility;

for wells (boreholes) for arid zones - copy of information on the qualitative condition of the land plot with indication of aridity of the zones;

copy of the technical passport of the water well in the form according to the order of the Minister of Agriculture of the Republic of Kazakhstan from June 4, 2009 № 326 "On approval of the Rules of passportization of hydromeliorative systems and water management facilities and the form of the passport" (registered in the Register of state registration of regulatory legal acts). № 5714);

copies of electronic invoices, payment documents confirming the fact of payment by the investor (service recipient) for services of the agreementing organization for construction and drilling of wells (boreholes), as well as the cost of pipes with indication of its thickness and diameter;

copy of the concluded agreement with the agreementor;

copies of the agreementor's license for construction and installation works under the sub-type soil drilling works, as well as for survey activities under the sub-type field soil investigations, hydrogeological investigations;

11) certificate of a financial institution indicating the details of the investor's (service recipient's) account for the transfer of investment subsidies in case the investor (service recipient) uses its own funds;

12) certificate of the financial institution indicating the details of the financial institution's account for transferring investment subsidies to repay the investor's (service recipient's) principal debt.

Footnote. Paragraph 23 as amended by the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160 (shall be enforced upon expiry of ten calendar days after its first official publication); as amended by the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025 № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

24. Confirmation of the purchase of machinery and/or automobiles by the investor (service recipient) shall be carried out through SISS information interaction with the state register of agricultural machinery and/or the "Automobile" database.

25. Working body (service provider) within 1 (one) working day from the moment of registration by the investor (service recipient) of the application shall confirm its acceptance by signing the corresponding notification using EDS. This notification shall become available in the personal cabinet of the investor (service recipient).

26. In case of incompleteness of the documents attached to the application or incompleteness of the necessary information contained in them, the working body (service provider) within 1 (one) working day shall refuse to provide the state service with a detailed description of the reasons for this refusal.

27. When an application is submitted and registered, the application shall be received in the "personal cabinet" of the working body (service provider) or a group of specialists.

Working body (service provider) upon receipt of an application from an investor (service recipient) within 10 (ten) working days shall carry out works in accordance with paragraph 4 of these Rules.

28. Refusal to issue subsidies shall be made on the grounds specified in paragraph 9 of the List of basic requirements for the provision of state service.

The decision to refuse to pay investment subsidies shall be made by the working body (service provider) in SISS on the basis of the act of inspection by a group of specialists or in case of identification of non-compliance of the investment project and/or submitted materials, facilities, data and information with the requirements established by these Rules.

29. The hearing procedure is conducted in accordance with Article 73 of the Administrative Procedure and Procedural Code of the Republic of Kazakhstan (hereinafter referred to as the APPC RK).

30. Information on the results of the application review shall be sent to the investor’s (service recipient’s) “personal account” and shall be reflected on the web portal.

Within 1 (one) business day from the date of adoption of a positive decision by the working body (service provider), the working body (service provider) shall, through the SISS, generate and sign an investment subsidy agreement in electronic form according to Appendix 12 to these Rules and an agreement on the targeted use and non-alienation of the investment subsidy object in accordance with Appendix 13 to these Rules, which shall be automatically sent to the investor (service recipient) for signature.

In the event of a malfunction of the SISS containing the information necessary for issuing subsidies, the working body (service provider) shall immediately notify the authorized body in the field of development of the agro-industrial complex on the situation that has arisen, which begins to eliminate it.

In this case, after carrying out works to eliminate the malfunction that has arisen, the authorized body in the field of development of the agro-industrial complex within 3 (three) working days shall draw up a protocol on the technical problem and post it in the SISS.

Footnote. Paragraph 30 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

31. The concluded investment subsidizing agreements are included in the reserve (waiting list) and are subject to subsidization under the conditions and criteria in force at the time of conclusion of the investment subsidizing agreement.

Investment subsidizing agreements shall be included in the reserve (waiting list) by the working body (service provider) by priority according to the date and time of receipt of applications.

Information on inclusion of the investment subsidizing agreement in the reserve (waiting list) shall be reflected in the SISS.

The subsidies under investment subsidy contracts entered into the reserve (waiting list) shall be paid by priority according to the date and time of entry of the investment subsidy contract into the reserve (waiting list) when additional budgetary funds are allocated in the current fiscal year. In the absence of additional budgetary funds in the current fiscal year, under investment subsidy contracts entered into the reserve (waiting list), payment of subsidies shall be made in the next fiscal year.

Notification of the allocation of additional budgetary funds in the current financial year, indicating the start of time and date of the start of payment of applications for subsidy contracts on the waiting list, shall be sent to the e-mail address specified by the investor (service recipient) when registering in the SISS, as well as to the "personal account" in the SISS.

Chapter 4. Separate conditions of investment subsidies for investments at the expense of borrowed funds

32. In the event of a planned acquisition by the investor (service recipient) of machinery, vehicles, equipment on credit/leasing, investment subsidies shall be transferred as an advance payment to a financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law of the Republic of Kazakhstan "On banks and banking activities in the Republic of Kazakhstan" (hereinafter - the Law on banks and banking activities), or to a financial institution licensed to carry out microfinance activities or JSC "Industrial Development Fund", to a special account.

In this case, for applications considered within the framework of:

1) project passports № 1, № 1.1, № 2, № 3, № 6, № 8, № 13, № 14, the feasibility of using the mechanism for transferring investment subsidies by advance payment to a financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, to a special account shall be determined by the investor (service recipient), which is reflected in the application for investment subsidies;

2) project passports № 4, № 5, № 7, № 9, № 10, № 12, № 15, № 16, № 17, № 18, № 19, № 20, № 21, № 22, № 23, № 24, № 25, № 26, № 27, № 27.1, № 28, № 29, № 30, № 31 the feasibility of using the mechanism for transferring investment subsidies by advance payment to a financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and banking activities or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, to a special account determined by the working body (service provider).

Footnote. Paragraph 32 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

33. To receive investment subsidies on a special account, the investor (service recipient) shall submit an electronic application for investment subsidies using the advance payment mechanism to a special account in the form according to Appendix 5 to these Rules and shall additionally attach a copy of the positive decision of the credit committee of the financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or by a financial institution licensed to carry out microfinance activities, or JSC Industrial Development Fund, certified by the financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on banks and banking activities, or by a financial institution licensed to carry out microfinance activities.

Within 3 (three) business days from the date of approval by the working body (service provider) of the investor's (service recipient's) application, a tripartite agreement and contract on non-use by the financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on banks and banking activities, or a financial institution licensed to carry out microfinance activities, or JSC Industrial Development Fund, and the investor (service recipient) shall be concluded on the non-use by the financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations, or a financial institution licensed to carry out microfinance activities, or JSC Industrial Development Fund, of investment subsidies in a special account in the form according to Appendix 14 to these Rules.

In this case, a financial institution that has a license from the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution that has a license to carry out microfinance activities, or JSC Industrial Development Fund, shall not use investment subsidies received into a special account until the conditions specified in paragraphs 34 or 35 of these Rules are timely fulfilled.

Footnote. Paragraph 33 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

34. In the case of financing an investor (service recipient) by providing a credit, a financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, within 10 (ten) business days from the date of receiving investment subsidies to a special account, shall issue a loan to the investor (service recipient), and submit supporting documents, a copy of the loan agreement to the working body (service provider).

A financial institution licensed by an authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, within a period of no more than 360 (three hundred and sixty) calendar days from the date of signing a tripartite agreement and an agreement on non-use by a financial institution licensed by an authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, of money in a special account, shall send to the working body (service provider) a written notification on completion of the delivery of machinery, vehicles, and (or) equipment to the investor (service recipient) with an attachment of a copy of the acts of acceptance and transfer of machinery, vehicles, equipment between the buyer and the supplier, an additional agreement to the credit contract (if any) and an agreement on the targeted use and non-alienation of the investment object subsidies in the form according to Appendix 13 to these Rules.

In this case, a financial institution that has a license from the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution that has a license to carry out microfinance activities or JSC Industrial Development Fund, may not use the funds in the special account until the requirements provided for in part two of this paragraph are met.

Based on requests from investors (service recipients), for which the final amount under the loan agreement actually turned out to be less than that specified in the subsidy agreement, the working body (service provider) recalculates the subsidies, identifies the amount of the difference (excess funds transferred to a special account) and, within a period of no more than 3 (three) business days, sends a notification to a financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law of the Republic of Kazakhstan on banks and banking activities, or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, on the need to restore the amount of the difference (excess funds transferred to a special account) to the current account of the working body (service provider).

A financial institution that has a license from the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution that has a license to carry out microfinance activities or JSC Industrial Development Fund, within a period of no more than 3 (three) business days from the date of receipt of notification from the working body (service provider), restores funds to the current account of the working body (service provider) in the amount specified in the notification.

For applications from investors (service recipients), for which the final amount under the credit contract actually exceeds the maximum allowable cost for calculating subsidies, recalculation of subsidies shall not be carried out.

Footnote. Paragraph 34 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

35. In case of financing the investor by providing the machinery, vehicles, and (or) equipment on lease, the financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on banks and banking activities, or the financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, within 10 (ten) business days from the date of receipt of the copy of the positive decision of the working body (service provider) and the funds to the special account, transfers the funds stipulated by the financial leasing contract to the account of the investor (service recipient), unless otherwise provided by the contract between the investor (service recipient) and the financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on banks and banking activities, or the financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, and provides the working body (service provider) with supporting documents, as well as a copy of the financial leasing agreement.

A financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, within a period of no more than 180 (one hundred eighty) calendar days from the date of receipt of funds to a special account, shall send a written notification to the working body (service provider) on the completion of delivery of machinery, vehicles, and (or) equipment to the investor (service recipient) with an attached act of acceptance and transfer of the leased item and an additional agreement to the lease contract to determine the final cost of the leased item.

In this case, a financial institution that has a license from the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution that has a license to carry out microfinance activities or JSC Industrial Development Fund, may not use the funds in the special account until the requirements provided for in part two of this paragraph are met.

At the request of investors (service recipients), for which the final cost of the leased item actually turned out to be less than that specified in the subsidy contract, the working body (service provider) recalculates the subsidies, identifies the amount of the difference (excess funds transferred to the special account) and, within a period of no more than 3 (three) working days, sends a notification to a financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, on the need to restore the amount of the difference (excess funds transferred to the special account) to the current account of the working body (service provider).

For applications from investors (service recipients), where the final cost of the leased item actually exceeds the maximum permissible cost for calculating subsidies, recalculation of subsidies shall not be carried out.

Footnote. Paragraph 35 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

36. If a financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, fails to comply with the conditions stipulated in paragraph 34 of these Rules (when financing an investor (service recipient) by providing a credit) or paragraph 35 of these Rules (when financing an investor (service recipient) by providing machinery, vehicles, and (or) equipment on lease), then the financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, within 3 (three) business days, shall restore the funds transferred by the working body (service provider) to the special account in full. Refunds of payments made in the current financial year shall be achieved by restoring the cash expenses of the operating body (service provider) by increasing the amount of unfulfilled obligations and reducing cash expenses according to the corresponding budget classification codes. In the event of a refund of payments from previous years, the refund amount shall be credited to the revenue of the relevant budget from which the payments were made.

Footnote. Paragraph 36 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

37. Funds transferred to a special account shall be credited by a financial institution licensed by the authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or by a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, towards the repayment of the investor's (service recipient's) principal debt on a credit/leasing used to purchase machinery, vehicles, and equipment within the framework of an investment project based on a positive decision by the working body (service provider) to provide the investor (service recipient) with an investment subsidy.

Footnote. Paragraph 37 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

Chapter 5. Final provisions

38. Monitoring of investment subsidies shall be carried out for 3 (three) years from the date of subsidization by the working body (service provider) in the SISS according to the following criteria:

1) quarterly for the purpose of non-alienation (including in terms of prohibition on the replacement and leasing of investment subsidy objects) and ensuring the targeted use by the investor (service recipient) of the acquired machinery, vehicles, and equipment;

2) according to project passports № 7, № 8 (for the milk processing plant), № 10, № 18, № 19, № 24, № 25, № 26, № 27, № 27.1, № 28, № 29 for the purpose of: actions/inactions of the investment subsidy object at least 1 (one) time per year from the moment of commissioning, achievement/failure to reach the investment subsidy object’s design capacity in the amount of at least 50 (fifty)% of the total design capacity within the timeframes stipulated by the business plan;

3) at least once a year for the purpose of achieving performance indicators for productivity and/or output and/or sales of products and/or utilisation of production capacities in accordance with the business plan of investment projects for which subsidies for construction and installation works have been provided in accordance with part one of paragraph 3 of these Rules;

4) at least once a year regarding the commissioning (within the timeframes specified in the business plan), actions/inactions, non-alienation, and targeted use of facilities subsidized within the framework of the mechanism for transferring subsidies by advance payment to a special account;

5) at least once a year after the payment of subsidies for compliance of the investor’s type of activity with the production and (or) processing of agricultural products, the main or secondary type of activity of which relates to the sections of the General Classifier of Economic Activities (OKED) of the relevant activity;

6) at least once a year upon execution by a financial institution of a contract and an agreement on non-use by a financial institution licensed by an authorized body for regulation, control and supervision of the financial market and financial organizations to conduct banking operations in accordance with the Law on Banks and Banking Activities, or by a financial institution licensed to carry out microfinance activities or JSC Industrial Development Fund, of investment subsidies in a special account.

Footnote. Paragraph 38 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

39. To perform monitoring functions, the working body (service provider) shall request from the investor (service recipient) the necessary information to fulfill the monitoring conditions specified in paragraph 38 of these Rules, including the necessary information to form a report on the utilization of subsidies for reimbursement of part of the costs incurred by the subject of agro-industrial complex in the course of investment investments in the form according to Annex 15 to these Rules, by sending the list of requested information to SISS.

Notification of a request by the working body (service provider) for a list of requested information shall be sent to the e-mail address specified by the investor (service recipient) when registering in the SISS, to the "personal cabinet" in the SISS, and additionally by text message to a cellular subscriber number that ensures the fixation of the notification.

The investor (service recipient) within 15 (fifteen) working days shall submit the requested information to the working body (service provider) by placing it in the SISS.

Failure by the investor to provide the requested information to the working body (service provider) within the specified timeframe shall be the basis for the working body (service provider) to make a decision to terminate investment subsidies and claim the return of paid investment subsidies.

At the same time, the return of paid investment subsidies shall be made by the investor.

40. Analysis based on monitoring data generated by the subsidizing information system shall be verified and agreed by the working body (service provider).

In case the investor (service recipient) fails to achieve performance and/or productivity and/or product sales and/or production capacity utilization indicators in accordance with the business plan of the investment project for which construction and installation works were subsidized, working body (service provider) within 2 (two) working days from the date of discovery of the fact shall take the actions provided for in this paragraph. In this case, the decision on non-return of paid subsidies shall be made on the basis of objective factors due to the occurrence of force majeure circumstances, which the investor (service recipient) is unable to foresee and prevent.

In case of alienation and/or misuse of purchased vehicles, machinery and/or equipment by the investor (service recipient), inactivity of the production facility within three calendar years from the date of commissioning or failure of the facility to reach its design capacity in the amount of at least 50 (fifty) % within the terms stipulated by the business plan, as well as establishment of non-compliance of the main and secondary type of activity of the investor (service recipient) with Annex 1 to these Rules, establishment of the fact of liquidation, rehabilitation or bankruptcy proceedings in respect of the investor (service recipient), suspension of the investor's (service recipient's) activity in accordance with the Tax Code, the Civil Code of the Republic of Kazakhstan, the Law on rehabilitation and bankruptcy, the working body (service provider) shall, within 30 (thirty) calendar days from the moment of taking a decision on the return of investment subsidies, initiate legal proceedings for the return of funds.

The working body (service provider) within 5 (five) working days from the moment of making a decision on termination of investment subsidies shall notify the investor (service recipient) by letter with indication of the reason for the decision made.

In this case, the working body (service provider) shall refund payments made in the current financial year by restoring cash expenditures of the working body (service provider) by increasing the amount of unfulfilled obligations and reducing cash expenditures under the relevant codes of the budget classification of expenditures. In case of refund of payments of previous years, the refund amount shall be credited to the income of the respective budget from which the payments were made.

41. Working body (service provider) quarterly, not later than the 5th day of the month following the reporting month, shall submit to the authorized body in the field of agro-industrial complex development through SISS a report on the use of subsidies for reimbursement of part of the costs incurred by the subject of agro-industrial complex, in the course of investment investments in the form according to Annex 15 to these Rules.

The annual report of the working body (service provider) on the development of subsidies for reimbursement of part of the costs incurred by the subject of AIC, for investment investments, shall be submitted to the authorized body in the field of agro-industrial complex development through SISS not later than the 10th day of the month following the reporting period, in the form according to Annex 15 to these Rules. In addition, the working body (service provider) shall provide a report on monitoring of the conditions specified in paragraph 38 of this Regulation through SISS.

42. The working body (service provider) shall quarterly, not later than the 5th day following the reporting period, publish on its official Internet resource a list of investors (service recipients) that received investment subsidies, indicating the project passport and the amount of subsidies received, as well as annually publish a monitoring report.

Chapter 6. The procedure for appealing decisions, actions (inaction) of the service provider and (or) its officials concerning the provision of state service

43. A complaint against a decision, action (inaction) of a working body (service provider) on the issues of rendering state services shall be submitted to the head of the working body (service provider), local executive body of the region, city of republican significance, capital (hereinafter referred to as the local executive body), to the authorized body for assessment and supervision over the quality of rendering state services.

In case of receipt of a complaint in accordance with paragraph 4 of Article 91 of the APPC RK, the working body (service provider) shall send it to the body considering the complaint (higher administrative body and (or) official) not later than 3 (three) working days from the date of receipt of the complaint. The complaint by the working body (service provider) shall not be forwarded to the body considering the complaint (higher administrative body and (or) official), in case of adoption of a favorable act, performance of an administrative action, fully satisfying the requirements specified in the complaint.

44. A complaint of an investor (service recipient) in accordance with paragraph 2 of Article 25, paragraph 2 of the Law on State services shall be subject to review by:

1) the working body (service provider), local executive body - within 5 (five) working days from the date of its registration;

2) the authorized body for assessment and control over the quality of state services - within 15 (fifteen) working days from the date of its registration.

45. The term of consideration of the complaint by the working body (service provider), local executive body, authorized body for evaluation and control over the quality of rendering state services in accordance with paragraph 4 of Article 25 of the Law on state services shall be extended for no more than 10 (ten) working days in cases of necessity:

1) conducting an additional investigation or review of the complaint or an on-site review;

2) receiving additional information.

In case of extension of the period of consideration of the complaint, the official authorized to consider complaints shall, within 3 (three) working days from the moment of extension of the period of consideration of the complaint, inform the investor (service recipient) who filed the complaint in writing (in case of filing a complaint on paper) or in electronic form (in case of filing a complaint in electronic form) about the extension of the period of consideration of the complaint with indication of the reasons for the extension.

46. Unless otherwise provided by law, recourse to the court shall be allowed after appealing in a pre-trial procedure in accordance with paragraph 5 of Article 91 of the APPC RK.

Annex 1
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

the Subsidy Rules for Reimbursement of a Part of the Expenses Incurred by
an AgroList of the main or secondary type of activity for an entrepreneurial entity making investment investments
nd engaged in production and (or) processing of agricultural productsIndustrial Complex Entity,
in the Context of Investments

Footnote. Annex 1 as amended by the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160 (shall be enforced upon expiry of ten calendar days after its first official publication).

№	Common Classifier of Economic Activity (CCЕA code)	Name from the Common Classifier of Economic Activity
1	01.11	Growing of grains (except rice), legumes and oilseeds
2	01.12	Rice growing
3	01.13	Growing vegetables, melons, root and tuber crops
4	01.16	Fiber crops growing
5	01.19	Growing other annual and biannual crops
6	01.21	Grape growing
7	01.24	Growing seed and stone fruits
8	01.25	Production of other fruits, berries and nuts
9	01.42	Breeding of other cattle and buffaloes
10	01.41	Breeding dairy cattle
11	01.43	Breeding horses and other equine animals
12	01.44	Breeding camels and other animals of the camelid family
13	01.45	Sheep and goat breeding
14	01.46	Pig farming
15	01.47	Agricultural poultry breeding
16	01.49	Breeding other species of animals
17	01.50	Mixed agriculture
18	10.11	Processing and preserving of meat
19	10.12	Processing and preserving of poultry meat
20	10.13	Production of meat and poultry products
21	10.31	Processing and preserving of potato
22	10.32	Production of fruit and vegetable juices
23	10.39	Other types of processing and preserving of fruits and vegetables
24	10.41	Production of oils and fats
25	10.42	Production of margarine and similar edible fats
26	10.51	Milс processing and cheese production
27	10.52	Ice-cream production
28	10.61	Production of flour and cereal products
29	10.62	Production of starch and starch products
30	10.71	Production of bakery and flour confectionery products for non-durable storage
31	10.72	Production of crackers and cookies, flour confectionery products for long-term storage
32	10.73	Pasta production
33	10.81	Sugar production
34	10.82	Production of cocoa, chocolate and sugar confectionery
35	10.84	Production of spices and seasonings
36	10.86	Production of baby food and dietary foods
37	10.89.9	Production of other food products not included in other groups
38	10.91	Production of ready-made feed for farm animals
39	13.10.3	Preparation of wool fiber
40	13.10.4	Spinning wool fiber
41	13.20.2	Production of woolen fabrics
42	13.99.2	Production of felt products
43	15.11.1	Tanning and dressing of leather
44	20.14.2	Bioethanol production
45	52.10.1	Warehousing and storage of grain
46	52.10.5	Warehousing and storage of vegetables and fruits
47	20.14.9	Production of other basic organic chemicals not included in other groupings
48	21.10.0	Production of basic pharmaceutical products

Annex 2
to the Subsidy Rules for Reimbursement
of a Part of the Expenses Incurred
by an Agro-Industrial Complex Entity,
in the Context of Investments

List of project passports

Footnote. Appendix 2 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

1	Purchase of agricultural machinery, vehicles, and equipment
1.1	Purchase of priority agricultural vehicles and equipment
1.2	Purchase of mounted and trailed agricultural machinery
2	Purchase of breeding and seed production machinery and equipment
3	Purchase of seed cleaning and sorting equipment
4	Establishment of infrastructure for irrigation of pastures and provision of water to livestock farms (wells, boreholes)
5	Establishment and expansion of livestock fattening facilities
6	Establishment and expansion of facilities for raising dairy cattle/goats
7	Establishment and expansion of facilities for slaughtering and meat processing
8	Establishment and expansion of a milk processing facility, Establishment of milk collection points, purchase of equipment and machinery for agricultural cooperatives, procurement organizations, milk collection points and milk processing enterprises
9	Purchasing equipment for a wool harvesting facility
10	Establishment and expansion of enterprises for processing skins and wool of farm animals
12	Construction and expansion of a greenhouse complex
13	Planting an intensive apple orchard of 5 hectares or more
14	Planting fruit and berry crops and grapes from 5 hectares
15	Establishment and expansion of poultry production facilities with a power output of 5,000 tons per year
16	Establishment of a breeding and hybrid centre with a power output to produce and raise 1,200 hybrid sows
17	Establishment and expansion of pig farming facilities with a power output of 1,000 sows
18	Establishment of a feed mill
19	Purchase of machinery and equipment for processing poultry manure, with a power output of 50 tons/day
20	Establishment and expansion of a breeding farm for egg and meat poultry farming
21	Construction and expansion of grain storage facilities
22	Construction and expansion of potato and vegetable storage facilities with a power output of 1,000 tons or more
23	Construction and expansion of fruit storage facilities from 1,000 tons
24	Establishment and expansion of a fruit/vegetable/melon processing enterprise
25	Construction of a potato processing plant
26	Establishment and expansion of an enterprise for the production of oil and fat products
27	Establishment and expansion of an enterprise for the production of processed grain products
27.1	Establishment and expansion of an enterprise for deep processing of plant products
28	Establishment and expansion of a sugar production plant
29	Expansion of a bakery and/or confectionery production facility with a power output of 2,000 tons of products per year
30	Expansion of poultry egg farms with an increase in production capacity from 50 million eggs per year
31	Purchase of equipment for agrochemical laboratories for soil analysis
32	Construction and expansion of a chicken egg processing plant

Appendix 3 to the Rules
for subsidizing the reimbursement
of part of the expenses incurred by
an agro-industrial complex entity
in the course of investment activities

List of project passports eligible for subsidies

Footnote. Appendix 3 is in the wording of the order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

Project passport № 1 "Purchase of Agricultural machinery, vehicles, and equipment"
№					Name and technical characteristics of machinery and equipment										Share of investment cost reimbursement, %												Minimum standard per unit of equipment, hectare/conventional heads of cattle												Maximum allowable cost for calculating subsidies per unit of machinery/vehicles/equipment/linear meter, tenge
1					Sugar beet harvester
1.1					trailer										50 %																								159 964 000
1.2					self-propelled										50 %																								457 733 000
2					Rice harvester with 80 horsepower (inclusive) on tracks										25 %																								18 000 000
3					Cotton harvester: with a power output of 201 horsepower (inclusive)										25 %																								135 667 000
4					Carrot harvester:
4.1					hinged										25 %																								21 368 000
4.2					semi-mounted										25 %																								55 644 000
4.3					single-row trailer										25 %																								47 602 000
4.4					two-row (three-row) trailer										25 %																								157 114 000
5					Cabbage harvester:
5.1					hinged										25 %																								12 500 000
5.2					Trailer										25 %																								11 000 000
6					Onion harvester:
6.1					semi-mounted										25 %																								53 099 000
6.2					trailer										25 %																								5 000 000
6.3					semi-trailer										25 %																								12 400 000
7					Potato harvester:
7.1					trailer										25 %																								148 511 000
7.2					self-propelled										25 %																								330 762 000
8					Tomato harvester										25 %																								85 000 000
9					Corn harvesting device										25 %																								7 000 000
10					Root harvester (digger)										50 %																								4 700 000
11					Haulm harvester										50 %																								25 211 000
12					Self-propelled combine harvester for berry crops										25 %																								71 300 000
13					Seeder:
13.1					Beetroot										50 %																								37 667 000
13.2					Vegetable										25 %																								32 299 000
13.3					Cotton										25 %																								2 400 000
14					Potato planter										25 %																								30 609 000
15					Seed treatment agent										25 %																								2 000 000
16					Grain loaders										25 %																								1 200 000
17					Grain throwers										25 %																								4 764 000
18					Grain hopper trailer										25 %																								76 917 000
19					Peeler										25 %																								10 000 000
20					Equipment for field leveling
20.1					laser planner										25 %																								14 438 000
20.2					scraper-planner										25 %																								25 813 000
21					Trailed/mounted header: rotary										25 %																								93 322 000
22					Bale trailer										25 %																								10 200 000
23					Roughage chopper										25 %																								13 133 000
24					Self-propelled reaper, self-propelled mower										25 %																								49 000 000
24.1					forage harvester										25 %																								39 500 000
25					Swath former, swather										25 %																								4 000 000
26					Trailer for transporting succulent feed										25 %																								4 800 000
27					Telescopic loader										25 %												from 500 hectares/from 50 heads												58 810 000
28					Front loader with a bucket capacity of up to 1.8 cubic meters										15 %												from 500 hectares / from 50 heads												16 189 000
29					Dryer for agricultural products (mobile grain dryer) from 49-145 tons per day (inclusive)										25 %																								29 569 000
30					Fertilizer application machine (trailer):
30.1					liquid fertilizers										25 %																								10 900 000
30.2					solid fertilizers:
30.2.1					lifting capacity up to 10 tons (inclusive)										25 %																								9 415 000
30.2.2					lifting capacity from 10.1-25 tons (inclusive										25 %																								25 275 000
30.2.3					lifting capacity from 25.1 tons (inclusive)										25 %																								84 159 000
31					Stone picker										25 %																								5 100 000
32					A 6x4 dump truck with an engine capacity of 10.90 to 15.0 litres, with a two-way or three-way dump platform for transporting agricultural and other inert cargo**										25 %																								32 500 000
33					A dump trailer with a two-way dump platform unloading type, for transporting agricultural and other inert cargo, with dual tires, with a gross weight of no more than 16,000 kilograms**										25 %																								6 000 000
34					Feed dispenser/feed dispenser-chopper-chopper (with a power output of at least 2.2 cubic meters)										25 %																								13 800 000
35					Grain crusher/ flattener										25 %																								300 000
36					Potato digger										25 %																								30 820 000
37					Herbicide pipe between rows with a tank capacity of 600 litres or more***										25 %																								2 609 000
38					Garden sprayer with a power output of 2000 litres***										25 %																								4 128 000
39					Opening/closing transfer with 2 discs***										25 %																								2 322 000
40					Digging plow ***										25 %																								1 300 000
41					Comb-forming cutter										25 %																								11 000 000
42					Pasture fencing (electric shepherd generator, step-down transformer, insulators, wire of at least 2 rows)* ***										25 %												от 50 голов from 50 heads												400
43					Hay trailer										25 %																								4 000 000
44					Multifunctional agricultural unmanned aerial systems (UAS) (for spraying pesticides, distributing seeds, fertilizers, etc.)										25%																								8 700 000
45					Fan sprayer
45.1					mounted with a working width of 20–100 meters										25%																								1 800 000
45.2					trailed with a working width of 20–100 meters										25 %																								6 800 000
46					Hinged mesh for fencing agricultural land against saiga antelopes infestation*****										50 %												1 linear meter												700
47					Posts (metal or concrete) for fixing the hinged net for fencing agricultural lands from saiga antelopes*****										50 %												1 unit												3 750
Note: In case of purchasing a vehicle for transporting agricultural goods, a land area of at least 120 hectares is required; positions 32, 33 are subsidized by funds from the local budget. * equipment purchased for establishing nursery beds for perennial fruit and berry crops and grapes is subsidized. ** The maximum permissible cost of pasture fencing must not exceed 16 million tenge per 1,000 hectares. To calculate the subsidy for self-propelled machinery and equipment, draft passports 1 and 1.1 use the rated engine power specified in the documents confirming the purchase of the machinery, vehicles, and/or equipment. *** positions 46, 47 are subsidized by funds from the local budget. The diameter of the mesh wire is not less than 2.5 millimeters, the height of the mesh is not less than 1.6 meters. Mesh cell dimensions: width no more than 100 millimeters, height no more than 75 millimeters. The distance between the posts is no more than 3-5 meters.

Project passport № 1.1 “Purchase of priority agricultural vehicles and equipment” * The share of investment reimbursement is 30%.
№					Name and technical characteristics of priority agricultural vehicles and equipment																																		Maximum allowable cost for calculating subsidies per unit of machinery/vehicles/equipment/linear meter, tenge
1					tractor (wheeled):
1.1					with a power output of up to 59 horsepower (inclusive)																																		7 500 000
1.2					with a power output from 60 to 84 horsepower (inclusive)																																		12 000 000
1.3					with a power output from 85 to 129 horsepower (inclusive)																																		14 900 000
1.4					with a power output of up to 59 horsepower (inclusive)																																		21 600 000
1.5					with a power output from 60 to 84 horsepower (inclusive)																																		32 700 000
1.6					with a power output from 85 to 129 horsepower (inclusive)																																		36 300 000
1.7					with a power output of 130 to 140 horsepower (inclusive)																																		54 800 000
1.8					with a power output from 141 to 160 horsepower (inclusive)																																		108 850 000
1.9					with a power output from 161 to 180 horsepower (inclusive)																																		181 685 000
1.10					with a power output from 181 to 300 horsepower (inclusive)																																		351 100 000
2					tractor (wheeled): with PowerTech ™ engine, and/or JDLink ™ telematics system, and/or AutoTrac ™ navigation system
2.1					with a power output of up to 129 horsepower (inclusive)																																		55 500 000
2.2					with a power output from 130 to 150 horsepower (inclusive)																																		103 500 000
2.3					with a power output from 151 to 220 horsepower (inclusive)																																		183 800 000
2.4					with a power output from 221 to 279 horsepower (inclusive)																																		294 700 000
2.5					with a power output from 280 to 430 horsepower (inclusive)																																		441 500 000
2.6					with a power output of 431 horsepower (inclusive)																																		540 600 000
3					tractor (caterpillar):
3.1					with a power output of 201 - 400 horsepower																																		60 100 000
4					Tractor (tracked): with PowerTech ™ engine, JDLink ™ telematics system, AutoTrac ™ navigation system
4.1					with a power output of up to 539 horsepower (inclusive)																																		554 300 000
4.2					with a power output of 540 horsepower (inclusive)																																		681 400 000
5					Grain harvester**:
5.1					with a power output of up to 249 horsepower (inclusive)																																		87 100 000
5.2					with a power output from 250 to 299 horsepower (inclusive)																																		123 125 000
5.3					with a power output from 300 to 359 horsepower (inclusive)																																		141 600 000
5.4					with a power output of 360 horsepower (inclusive)																																		169 450 000
6					Combine harvester: with PowerTech ™ engine and/or JDLink ™ telematics system and/or AutoTrac ™ guidance system**
6.1					with a power output of up to 299 horsepower (inclusive)																																		175 000 000
6.2					with a power output from 300 to 449 horsepower (inclusive)																																		434 100 000
6.3					with a power output of 450 horsepower (inclusive)																																		672 400 000
7					forage harvester (forage harvester):
7.1					with a power output from 200 to 449 horsepower (inclusive)																																		68 000 000
8					Forage harvester: with PowerTech ™ engine and JDLink ™ telematics system , and Dura Line™ technology throughput components .
8.1					with a power output of up to 500 horsepower (inclusive)																																		449 500 000
8.2					with a power output of 501 horsepower (inclusive)																																		569 500 000
9					Cotton harvester: with PowerTech ™ engine and/or JDLink ™ telematics system, with PRO12 or MR16 or MR12 row cotton harvesting elements
9.1					with a power output of up to 500 horsepower (inclusive)																																		631 800 000
9.2					with a power output of 501 horsepower (inclusive) (with PowerTech ™ engine and JDLink ™ telematics system, MR16 row cotton harvesting elements and an integrated automatic cotton baling chamber and packaging into bales covered with TamaWrap +™ film and a baling process control system) Cotton Pro (HID, Cotton Pro), with CommandCenter ™ G5Plus control monitor, AutoTrac ™ RowSense ™ automatic row guidance function																																		1 127 000 000
10					seeder:
10.1					for sowing grain and leguminous crops																																		2 660 000
10.2					pneumatic seeder/seeding complex:
10.2.1					working width up to 15 meters																																		135 443 000
10.2.2					working width from 15.1 meters																																		186 914 000
11					TruPosition ™ opener shanks or ConservaPak ™ openers or ProSeries ™ openers, RelativeFlow ™ seed tube blockage control system. Plastic seed hopper, conveyor-type conveyor, seed metering unit with metering seeding rollers
11.1					pneumatic seeder/seeding complex:
11.1.1					working width up to 15 meters																																		572 600 000
11.1.2					working width from 15.1 meters																																		786 550 000
11.2					Mechanical grain drill with twin-disc or ProSeries ™ opener, combination seed and fertilizer hopper																																		164 700 000
11.3					Precision seed drill with MaxEmerge or ExactEmerge seeding unit
11.3.1					up to 24 rows (inclusive)																																		385 300 000
11.3.2					over 24 rows																																		872 500 000
12					dryer for agricultural products:
12.1					up to 20 tons per hour (inclusive)																																		40 850 000
12.2					from 20.1 to 40 tons per hour (inclusive)																																		95 000 000
12.3					over 40.1 tons per hour																																		117 000 000
13					machines for cleaning grain and seeds:
13.1					Machine for preliminary cleaning of grain up to 150 tons per hour																																		5 346 000
13.2					Drum-type primary grain cleaning machine with a power output of up to 60 tons per hour																																		12 450 000
13.3					Machine for primary and secondary grain cleaning with flat screen mills from 40 to 60 tons per hour																																		17 500 000
13.4					Machine for primary and secondary grain cleaning with flat screen mills from 60 to 120 tons per hour																																		25 850 000
14					Grain conveyor:
14.1					Grain belt conveyor, capacity from 100 to 200 tons per hour																																		11,156,000
14.2					grain scraper conveyor, capacity from 100 to 200 tons per hour																																		9,183,200
15					Grain elevator (noria), capacity from 50 to 200 tons per hour																																		15,491,840
16					Aerodynamic sorting machine, capacity from 10 to 30 tons per hour																																		6,000,000
17					Pneumatic sorting table , capacity up to 10 tons per hour																																		28,450,000
18					Screw conveyor with a power output of 60 tons/hour and a length of 8 m																																		2,100,000
19					Trier block, capacity from 8 to 12 tons per hour																																		10,250,000
20					plow (three or more bodies)
20.1					working width up to 2 meters																																		1,274,000
20.2					working width 2.1-4 meters																																		3,080,000
20.3					working width from 4.1 meters																																		7,300,000
21					disc/rotary harrow:
21.1					working width up to 6 meters																																		9,167,000
21.2					working width from 6.1 meters																																		12,134,000
22					spring harrow																																		20,000,000
23					tooth harrow:
23.1					working width up to 20 meters																																		12,079,000
23.2					working width from 20.1 meters																																		19,475,000
24					smooth water-filled ring-spur roller/toothed roller																																		15,675,000
25					cultivator
25.1					working width up to 4.9 meters																																		1 950 000
25.2					working width 5-9.9 meters																																		18 269 000
25.3					working width from 10 meters																																		15 101 000
26					a cultivator with TruPosition ™ shanks and tandem wheels for Walk-Over contour following , and/or Single Point depth adjustment
26.1					working width up to 4.9 meters																																		75 500 000
26.2					working width 5-9.9 meters																																		177 000 000
26.3					working width from 10 meters																																		278 505 000
27					soil-cultivating unit, combined implement
27.1					working width up to 4.9 meters																																		5 972 000
27.2					working width from 5 meters																																		22 145 000
28					trailed/mounted header:
28.1					header up to 8.9 meters:																																		12 767 000
28.2					reaper from 9 meters:																																		31 865 000
29					Trailed/mounted header: with a reel with composite fingers and/or with the Dial -a-Speed automatic reel speed system and/or with the Active Header Control/ HydroFlex /Active Header contour following system Float
29.1					header up to 7 meters:																																		44 600 000
29.2					header from 7.1 to 8.9 meters:																																		58 600 000
29.3					header from 9 to 12.9 meters:																																		104 358 000
29.4					header from 13 meters:																																		174 300 000
30					pick-up platform for a combine harvester																																		4 300 000
31					Combine harvester pick-up platform with height control control - HCU/AHC contour following system , plastic pick-up belt fingers, Dial -a-Speed automatic belt speed system and/or FieldGlide shock absorption system																																		52 000 000
32					ripper
32.1					working width up to 4.9 meters																																		3 243 000
32.2					working width from 5 meters																																		10 359 000
33					ripper with TruSet ™ depth control technology and/or Single Point depth adjustment
33.1					working width up to 4.9 meters																																		119 900 000
33.2					working width from 5 meters																																		185 110 000
34					paraplough																																		10 949 000
35					rakes and tedders																																		1 215 000
36					hydraulic transverse rake
36.1					working width up to 9.9 meters																																		1 078 000
36.2					working width from 10 meters																																		1 948 000
37					snowplow, swather , swather																																		9 500 000
38					combined universal tractor attachment																																		2 008 000
38.1					pitchfork																																		498 000
38.2					ladle																																		375 000
38.3					dump																																		823 000
39					tractor trailer:
39.1					lifting capacity up to 6 tons																																		4 350 000
39.2					lifting capacity from 6.1 tons																																		9 445 000
40					baler:
40.1					rolled																																		4,450,000
40.2					bale																																		6,900,000
41					Baler compatible with tractors equipped with AutoTrac ™
41.1					Fixed chamber roll baler with 2.2m MaxiCut HC pre-cutter system or 1.79m standard pick-up																																		45,330,000
41.2					Bale with offset adjustment system, centralized knotter lubrication system; knotter cleaning fan																																		31,240,000
41.3					for green fodder (silage, haylage): with film packaging and the addition of B- Wrap preservatives, with a weighing and moisture measurement system and a CommandCenter operating parameter control system, a unique CoverEdge strapping system																																		100,070,000
42					mowers, mower- conditioners
42.1					working width up to 3.9 meters																																		1 738 000
42.2					working width 4-5.9 meters																																		1 593 000
42.3					working width from 6 meters																																		2 793 000
43					Self-propelled mowers with AutoTrac ™ guidance system, Dial -a-Speed automatic reel speed system , table movement system and automatic belt reversing																																		276 920 000
44					sprayer:
44.1					trailer:																																		14,103,000
44.2					self-propelled:
44.2.1					capacity of 1501-2400 liters																																		53,989,000
44.2.2					capacity from 2401 liters																																		90,623,000
44.3					spraying equipment kit (for installation on a transport chassis)																																		25,310,000
45					sprayer:
45.1					Trailed: with a solution spraying system with AutoFill and AutoDiluter functions, BoomTrac ™ or TerrainControl Pro™/ TerrainCommand Pro™ boom stabilization system , CommandCenter ™ systems control display																																		170 280 000
45.2					Self-propelled: with PowerTech ™ engine and JDLink ™ telematics system, BoomTrac ™ boom stabilization system or TerrainControl Pro™ / Terrain Command Pro™, AutoTrac ™ navigation system , Command Center™ systems control display
45.2.1					capacity up to 3000 liters																																		424 400 000
45.2.2					capacity from 3001 to 5999 liters																																		471 800 000
45.2.3					capacity from 6000 liters																																		827 460 000
46					Trailed: with a solution spraying system with AutoFill and AutoDiluter functions, BoomTrac ™ or TerrainControl Pro™/ TerrainCommand Pro™ boom stabilization system , CommandCenter ™ systems control display																																		12 264 000
47					Mobile mixing complex for plant protection products, pump capacity from 200 to 2000 liters per minute																																		8 775 000
48					Mixing complex for plant protection products, pump capacity from 200 to 2000 liters per minute																																		34 636 000
49					Trailed liquid fertilizer applicator with a power output of up to 8,001 liters																																		646 700 000
50					Self-propelled fertilizer spreader with PowerTech ™ engine and JDLink ™ telematics system , AutoTrac ™ guidance system, CommandCenter ™ control display																																		1 855 000
Note: * to calculate the subsidy for self-propelled machinery and vehicles in project passports 1 and 1.1, the nominal engine power specified in the documents confirming the purchase of machinery, vehicles and (or) equipment is used. ** The maximum allowable cost for calculating subsidies for grain harvesters includes the cost of the header and/or pickup platform. If a grain harvester is purchased without a header and/or pickup platform, the subsidy may be calculated without including the cost of the header and/or pickup platform.
Project passport № 1.2 "Purchase of mounted and trailed agricultural machinery" *
№	Name and technical characteristics of machinery and equipment																							The share of reimbursement of investments %										Maximum allowable cost for calculating subsidies per unit of machinery/vehicles/equipment/linear meter, tenge
1	Seeder for sowing grain and leguminous crops:
1.1	working width up to 3 meters (inclusive)																							15 %										2 488 000
1.2	working width from 3.1 meters (inclusive)																							15 %										7 162 000
2	Pneumatic/seeding complex:
2.1	working width up to 6 meters (inclusive)																							15 %										51 509 000
2.2	working width from 6.1 to 12 meters (inclusive)																							15 %										149 514 000
2.3	working width from 12.1 meters (inclusive)																							15 %										184 281 000
3	Plough (three or more bodies):
3.1	working width up to 4.0 meters (inclusive)																							15 %										2 245 000
3.2	working width from 4.1 meters (inclusive)																							15 %										19 000 000
4	Disc/rotary harrow:
4.1	working width up to 6.0 meters (inclusive)																							15 %										12 099 000
4.2	working width from 6.1 meters (inclusive)																							15 %										18 957 000
5	Spring harrow																							15 %										17 000 000
6	Tooth harrow:
6.1	working width up to 12 meters (inclusive)																							15 %										5 830 000
6.2	working width from 12.1 to 20 meters (inclusive)																							15 %										11 438 000
6.3	working width from 20.1 meters (inclusive)																							15 %										23 863 000
7	Cultivator																							15 %										34 764 000
8	Trailed/mounted header:
8.1	header from 6-9 meters:																							15 %										27 723 000
8.2	header from 9.1 meters:																							15 %										42 817 000
9	Baler
9.1	Roll																							15 %										18 367 000
10	Mowers, mower -conditioners , disc mowers:
10.1	working width up to 8 meters (inclusive)																							15 %										6 170 000
10.2	working width from 8.1 meters (inclusive)																							15 %										36 311 000
11	Pick-up platform for a combine harvester:
11.1	width up to 4.0 meters (inclusive)																							15 %										6 069 000
11.2	width from 4.1 meters (inclusive)																							15 %										30 827 000
Note: *subsidies are provided for machinery, vehicles and equipment purchased before May 25, 2024 (inclusive).
Project passport № 2 "Purchase of selection and seed-growing machinery and equipment"*
The share of investments reimbursement is 50%.
№				Name and technical characteristics of machinery and equipment																															Maximum allowable cost for calculating subsidies per unit of machinery/equipment, tenge
1				Selection combines**:
1.1				with a power output of 52 horsepower																															102 169 643
1.2				52 horsepower with weighing system																															149 138 393
1.3				with a power output of 75 horsepower																															227 575 893
1.4				115 horsepower with weighing system																															264 486 607
1.5				with a power output of 185 horsepower																															196 875 000
1.6				185 horsepower with weighing system																															187 151 786
2				Selection seeders**:
2.1				continuous seeding																															40 660 714
2.2				Row crop																															49 714 286
2.3				Cassette																															96 955 357
2.4				self-propelled																															80 852 679
2.5				dotted sowing																															76 883 929
2.6				hand seeder																															6 308 036
3				selection and seed production equipment:
3.1				a machine for wet treatment of small batches of seeds up to 3 kilograms																															9 004 464
3.2				a machine for wet treatment of seed batches from 10 kilograms with a power output of up to 50 kilograms/hour																															12 125 000
3.3				grain thresher with a power output of up to 300 kilograms/hour																															11 026 786
3.4				grain thresher for individual ears and small sheaves																															10 138 393
3.5				single-ear thresher with a power output of up to 300 kilograms/hour																															12 022 321
3.6				bunch thresher with 2 concaves																															14 535 714
3.7				sample divider for dividing grain samples into 6 parts																															5 776 786
3.8				laboratory seed counter																															7 508 929
3.9				laboratory grinder																															16 151 786
3.10				seed counter																															15 169 643
3.11				laboratory machine for gentle cleaning and sorting of seeds up to 50 kilograms/hour																															6 281 250
Note: * Subsidies are provided for machinery and equipment purchased by certified producers of original seeds and elite seed farms operating in accordance with the Law of the Republic of Kazakhstan “On Seed Production” (hereinafter - the Law on Seed Production). ** Breeding equipment is subsidized based on the area of progeny testing nurseries and propagation nurseries owned by certified producers of original seeds and elite seed farms. One unit of breeding equipment is calculated for every 20 hectares of progeny testing nursery and propagation nursery area. Subsidies for the next unit of equipment of the same type are permitted if the area exceeds the established standard by 50%.
Project passport № 3 "Purchase of seed cleaning and sorting equipment"*
The share of investments reimbursement is 50%.
№			Name and technical characteristics of the equipment																																Maximum allowable cost for calculating subsidies per unit of equipment (tenge)*
1			Seed cleaning and sorting equipment with a seed cleaning capacity of up to 5 tons/hour, including installation supervision and commissioning (European models). The line includes equipment for receiving, primary cleaning and sorting seeds (primary separator with upper screen plane cleaning by a scraper conveyor, secondary separator with upper screen plane cleaning by a scraper conveyor, colour sorter , pelletizer , indented block, pneumatic table ), treater, seed and waste transportation (elevators, chain and belt conveyors), a set of gravity pipes, aspiration pipes, cyclones**, complex automation (control cabinet and cable material).																																344 812 048
2			Seed cleaning and sorting equipment with a seed cleaning capacity of 5.1 to 10 tons/hour, including installation supervision and commissioning (European models). The line includes equipment for receiving, primary cleaning and sorting of seeds (primary separator with upper screen plane cleaning by a scraper conveyor, secondary separator with upper screen plane cleaning by a scraper conveyor, colour sorter , pelletizer , indented block, pneumatic table ), treater, seed and waste transportation (elevators, chain and belt conveyors), a set of gravity pipes, aspiration pipes, cyclones**, complex automation (control cabinet and cable material).																																397 504 915
3			Seed cleaning and sorting equipment with a seed cleaning capacity of 10.1 to 20 tons/hour, including installation supervision and commissioning (European models). The line includes equipment for receiving, primary cleaning and sorting (primary separator, screen mill, secondary separator, colour sorter , pellet mill , indented cylinder, pneumatic table), screen surface cleaning, transportation (conveyors, bucket elevators, chain and belt conveyors, a set of gravity pipes, aspiration pipes, diverter valves, distributor for automatic unloading), treater, bagging, complex automation (control panel and cable material).																																591 780 228
4			Seed cleaning and sorting equipment with a seed cleaning capacity of up to 5 tons/hour, including installation supervision and commissioning (models manufactured in the Republic of Kazakhstan, the Countries of the Independent States, Ukraine). The line includes equipment for receiving, primary cleaning and sorting of seeds (primary separator with upper screen plane cleaning by a scraper conveyor, secondary separator with upper screen plane cleaning by a scraper conveyor, indented block, pneumatic table ), treater, seed and waste transportation (elevators, chain and belt conveyors), a set of gravity pipes, aspiration pipes cyclones**, complex automation (control cabinet and cable material).																																134 623 037
5			Seed cleaning and sorting equipment with a seed cleaning capacity of 5.1 to 10 tons/hour, including installation supervision and commissioning (models manufactured in the Republic of Kazakhstan, the Countries of the Independent States, Ukraine). The line includes equipment for receiving, primary cleaning and sorting of seeds (primary separator with upper screen plane cleaning by a scraper conveyor, secondary separator with upper screen plane cleaning by a scraper conveyor, indented block, pneumatic table ), treater, seed and waste transportation (elevators, chain and belt conveyors), a set of gravity pipes, aspiration pipes, cyclones**, complex automation (control cabinet and cable material).																																162 201 608
6			Seed cleaning and sorting equipment with a seed cleaning capacity of 10.1 to 20 tons/hour, including installation supervision and commissioning (models manufactured in the Republic of Kazakhstan, the Countries of the Independent States, Ukraine). The line includes equipment for receiving, primary cleaning and sorting of seeds (primary separator with upper screen plane cleaning by a scraper conveyor, secondary separator with upper screen plane cleaning by a scraper conveyor, indented block, pneumatic table ), treater, seed and waste transportation (elevators, chain and belt conveyors), a set of gravity pipes, aspiration pipes, cyclones**, complex automation (control cabinet and cable material).																																162 469 466
Note: * Subsidies are provided for equipment purchased by certified producers of original seeds, elite seed-growing and seed-growing farms operating in accordance with the Law on Seed Production; ** purchase of equipment if necessary.
Project passport № 4 "Establishment of infrastructure for irrigation of pastures and provision of water to livestock farms (wells, boreholes)"
The share of investments reimbursement is 50%.
№			Name and technical characteristics of the object																	Unit of measurement															Maximum permissible cost, tenge/unit of measurement
1			Construction of a watering point (one of the following):																	linear meter
1.1			shaft well (regardless of the well's depth, the maximum depth for subsidization is no more than 20 meters)																																50 000
1.2			a tube well (borehole) with a maximum permissible depth subject to subsidization of no more than 50 meters;																																40 000
			for desert and semi-desert zones – no more than 375 meters																																70 000
Note: The irrigation area of one well is up to 2,000 hectares of pasture. * The investor must have at least 50 conventional heads of cattle per well at the time of submitting an application for subsidies. When constructing a tube well (borehole), the pipe diameter must be at least 168 millimetres and the pipe wall thickness must be at least 5 millimetres, with the exception of wells constructed before January 1, 2024. A mandatory clause in the contract is the contractor's guarantee to ensure the water flow specified in the facility's passport for one year.
Project passport № 5 “Establishment and expansion of livestock fattening facilities”
The share of investments reimbursement is 25%
№			Name and technical characteristics of construction and installation works and equipment																																					Unit of measurement of project capacity						Maximum allowable cost for calculating subsidies per unit of capacity, tenge
1			A site with pens for the simultaneous keeping of 5,000 head of cattle, equipped with feeders on concrete platforms at least 3 meters wide (based on 30 centimeters of feeding table per head), an automated water supply system with automatic drinkers, a veterinary station equipped for working with livestock (including a restraining device), a feed processing unit, and storage facilities or areas for at least 5,000 tons of concentrated feed, as well as the necessary machinery and equipment for servicing the facility. The cost of the investment project shall be determined in accordance with the design and estimate documentation — for new construction or expansion.																																					place for keeping 1 head of cattle						200 000 100 000
2			A site with pens for the simultaneous keeping of 5,000 head of sheep, equipped with feeders, solid flooring (based on at least 10 centimeters of feeding table per head) or a portable device for feeding concentrated feed, an automated water supply system with automatic drinkers, a veterinary station equipped for working with small cattle (including a crush and restraining device), a ramp for loading and unloading livestock, a feed processing unit or grain crusher/flattener, and storage facilities or an area for at least 1,000 tons of concentrated feed, along with the necessary machinery and equipment for servicing the facility. The cost of the investment project shall be determined in accordance with the design and estimate documentation — for new construction or expansion.																																					place for keeping 1 head of small cattle						20 000 10 000
3			Semi-trailer – for transporting livestock, one per thousand conventional heads of cattle																																					1 unit						32 000 000
4			Tractor – for transporting livestock, one per thousand heads of conventional cattle																																											25 000 000
Note: If the investment project provides only for the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the limits of the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of equipment under purchase and sale (leasing) contracts, contracts for the supply and (or) installation of equipment, as well as accompanying documents (customs declaration, invoices, documents confirming payment).
Project passport № 6 "Establishment and expansion of facilities for raising dairy cattle/goats"
The share of investments reimbursement is 25%.
№			Name and technical characteristics of construction and installation works and equipment																																			Unit of measurement of project capacity								Maximum allowable cost for calculating subsidies per unit of capacity or equipment, tenge
Establishment and expansion of facilities for raising dairy cattle with a power output of 400 heads of breeding stock:
1			A dairy farm comprising buildings for a cow barn, calf barn, milking parlor, feed processing unit, maternity unit with a prophylactic area, exercise yards, and the necessary machinery and equipment for servicing the facility, as well as a manure storage facility. The cow barn shall be equipped with: stalls for cows, feeding tables with restraining devices (if necessary), internal passage fences, cow-scratching devices, ventilation equipment (if necessary), a water supply system, a liquid manure separation system (if necessary), and a veterinary and sanitary station. The milking unit shall include a robotic milking system or a milking parlor equipped with an automated milking installation (carousel, parallel, herringbone, or tandem) and/or a milk pipeline, a milk cooling tank, and a cow health monitoring system. The calf barn shall be equipped with pens for calf housing, and the facility shall also include silage trenches. The cost of the investment project shall be determined in accordance with the design and estimate documentation.																																			place for a forage cow
			during construction																																											2 900 000
			when expanding																																											1 450 000
Note: If the investment project provides only for the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the limits of the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of equipment under purchase and sale (leasing) contracts, contracts for the supply and (or) installation of equipment, as well as accompanying documents (customs declaration, invoices, documents confirming payment).
Equipment for a dairy farm with 50 heads of breeding stock:
1			Milking machine with milk pipeline																																			1 unit								10 000 000
2			Portable milking machine																																			1 unit								90 000
3			Milk cooling tank																																											3 000 000
4			Manure removal system																																											7 000 000
5			Stall equipment for keeping cows (partition)																																											50 000
6			Feed fence ( headlock )																																											50 000
7			Mats (rubber floor covering)																																			place for a forage cow								30 000
Establishment and expansion of facilities for growing dairy goats with a power output of 600 heads
1			A dairy farm for goat breeding, comprising buildings for housing goats, a milking parlor, a feed processing unit, a maternity unit with a prophylactic area, and a building for housing breeding bucks with an exercise yard. The cost of the investment project shall be determined according to the design and estimate documentation:																																			place for a forage goat
			during construction																																											1 500 000
			when expanding																																											750 000
Note: If the investment project provides only for the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the limits of the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of equipment under purchase and sale (leasing) agreements, contracts for the supply and (or) installation of equipment, as well as accompanying documents (customs declaration, invoices, documents confirming payment).
Project passport № 7 "Establishment and expansion of facilities for slaughtering and meat processing"
The share of investments reimbursement is 25%.
№						Name and technical characteristics of machinery and equipment																							Unit of measurement of project capacity										Maximum allowable cost for calculating subsidies per unit of capacity or equipment, tenge
1						A meat processing plant with a production capacity of 8 standard heads per hour, featuring an automated slaughter line, refrigerated meat maturation chambers, a deboning and trimming facility, an offal and skin processing facility, a meat blast freezing facility, a finished product packaging facility, refrigerated storage facilities for finished products, a waste treatment facility, a waste treatment facility, infrastructure and equipment for life support systems, and a veterinary sanitary laboratory. The cost of the investment project shall be determined according to the design and estimate documentation:																							basic cattle unit in one shift
						Construction																																	8 000 000
						Expansion																																	4 000 000
2						A meat processing plant (workshop) for the production of sausages and/or semi-finished and/or canned goods with a daily capacity of 5 tons or more, including refrigerated storage chambers for raw material storage, a deboning and trimming shop, a production line for sausages and meat products and/or canned and/or semi-finished goods in vacuum and/or gas packaging, and refrigerated storage chambers for finished goods. The cost of the investment project shall be determined according to the design and estimate documentation:																							ton per day
						Construction																																	100 000 000
						Expansion																																	50 000 000
3						Tractor unit*																							1 unit										25 000 000
4						Refrigerated semi-trailer from 20 tons*																																	20 000 000
5						Refrigerated semi-trailer from 20 tons with overhead tracks*																																	30 000 000
6						Refrigerated truck (vehicle with refrigeration equipment for transporting meat and meat products)* :
6.1.						lifting capacity from 1.5 tons to 5 tons*																																	9 200 000
6.2						lifting capacity from 5 tons and above*																																	19 700 000
6.3.						Livestock semi-trailer, divided into sections, with a ramp for loading/unloading livestock*																																	32 000 000
6.4						Tractor for cattle truck*																																	25 000 000
Note: * no more than two units per meat processing plant. If the investment project provides only for the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the limits of the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of equipment under purchase and sale (leasing) contracts, contracts for the supply and (or) installation of equipment, as well as accompanying documents (customs declaration, invoices, documents confirming payment).
Project passport № 8 "Establishment and expansion of a milk processing facility, establishment of milk collection points, purchase of equipment and machinery for agricultural cooperatives, procurement organizations, milk collection points and milk processing enterprises"
The share of investments reimbursement is 25%.
№									Name and technical characteristics of machinery and equipment										Unit of measurement of project capacity							Maximum allowable cost for calculating subsidies per unit of capacity or equipment/machinery/equipment, tenge
1									A milk processing plant with a production capacity of 1 ton per day, equipped with technological equipment for milk processing, packaging, and storage of dairy products. The cost of the investment project shall be determined according to the design and estimate documentation:										1 ton per day
									Construction																	25 700 000
									Expansion																	12 800 000
2									Block container with finishing, heating, engineering system, installation of equipment: milk cooler, table with stainless steel sink, milk pump, electric water heater, milk meters, milk analyzer, filters.										1 unit							5 000 000
2.1									Purchase of equipment for agricultural cooperatives, procurement organizations, and milk collection points:										1 unit
2.1.1									Milk cooler																	2 200 000
2.1.2									Portable milking machine																	90 000
2.1.3									Milk pump																	140 000
2.1.4									Electric water heater																	90 000
2.1.5									Milk meter																	120 000
2.1.6									Milk quality analysis device																	80 000
2.1.7									Housing with filter																	40 000
2.1.8									Power plant (diesel or gasoline)																	1 000 000
3									Purchase of laboratory equipment for agricultural cooperatives, procurement organizations, milk collection points and milk processing plants:										1 unit
3.1									Express indicators for detecting mastitis																	100 000
3.2									Laboratory equipment for determining the quality and safety of milk																	120 000 000
3.3									Refrigeration equipment for storing samples																	500 000
4									A vehicle for transporting milk (a vehicle with a tanker designed for transporting milk) and (or) a milk tanker semi-trailer with thermal insulation to prevent changes in the temperature of the liquid:										1 unit
4.1									a milk tanker based on a truck with a power output of at least 1 ton																	8 000 000
4.2									a milk tanker based on a truck with a power output of 4 tons																	13 000 000
4.3									a milk tanker based on a truck with a power output of 7 tons																	25 000 000
4.4									a milk tanker based on a truck with a power output of 12 tons																	32 000 000
4.5									a milk tanker based on a semi-trailer with a power output of 12 tons																	32 000 000
5									Milk tank trailer:										1 unit
5.1									capacity from 300 liters																	1 500 000
5.2									capacity from 400 liters																	2 000 000
5.3									capacity from 900 liters																	2 300 000
5.4									capacity from 1100 liters																	2 500 000
6									Refrigerated truck (a vehicle with refrigeration equipment for transporting dairy products)*										1 unit
6.1									lifting capacity from 1.5 tons to 5 tons*																	9 200 000
6.2									lifting capacity from 5 tons and above*																	19 700 000
6.3									Tractor unit*										1 unit							30 000 000
6.4									Refrigerated semi-trailer up to 10 tons*										1 unit							20 000 000
6.5									Refrigerated semi-trailer from 10 tons*										1 unit							30 000 000
7.									Purchase of equipment for the production of dry milk and/or whey for the expansion of existing milk processing plants (roller dryer, crushing or spraying unit)										1 ton per day							32 500 000
Note: * no more than two units per milk processing plant. If the investment project provides only for the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the limits of the established maximum permissible cost for calculating subsidies per unit of capacity and the share of reimbursement of investment from the cost of equipment under purchase and sale (leasing) contracts, contracts for the supply and (or) installation of equipment, as well as accompanying documents (customs declaration, invoices, documents confirming payment).
Project passport № 9 "Purchase of equipment for a wool harvesting facility"
The share of investments reimbursement is 25%.
№								Name and technical characteristics of machinery and equipment									Maximum allowable cost for calculating subsidies per unit of machinery/vehicles/equipment, tenge
1.								Shearing station:
1.1								Electromechanical sheep shearing tool (per unit)									520 000
1.2								Press									500 000
1.3								Equipment for loosening and cleaning wool waste (no more than 1 set)									1 500 000
2.								Mobile shearing station (two-axle trailer with an opening body, sorting net, press, express equipment for determining the fineness, stacker).									11 000 000
Project passport № 10 “Establishment and expansion of enterprises for the processing of hides and wool of agricultural animals”
The share of investments reimbursement is 25%
№						Name and technical characteristics of machinery and equipment																																Maximum allowable cost for calculating subsidies, tenge
1.						Primary wool processing plant with a power output of 350 kilograms/hour The cost of the investment project shall be determined according to the design and estimate documentation
						construction																																868 000 000
						expansion																																430 000 000
2.						Enterprise for deep processing of wool with a power output of 1000 kilograms per day The cost of the investment project shall be determined according to the design and estimate documentation
						construction																																4 000 000 000
						expansion																																4 000 000 000
3.						An enterprise for the primary processing of cattle hides with a power output of 600 pieces per day, small cattle hides – 2000 pieces per day. The cost of the investment project shall be determined according to the design and estimate documentation
						construction																																661 000 000
						expansion																																300 000 000
4.						Enterprise for deep processing of cattle hides from 2,000 pieces per day, small cattle – 5,000 pieces per day. The cost of the investment project shall be determined according to the design and estimate documentation
						construction																																4 600 000 000
						expansion																																2 300 000 000
Note: If the investment project provides only for the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies with a share of the reimbursement of investment from the cost of the equipment under purchase and sale (leasing) agreements, contracts for the supply and (or) installation of equipment, as well as accompanying documents (customs declaration, invoices, documents confirming payment).
Project passport № 12 "Construction and expansion of a greenhouse complex"
The share of investments reimbursement is 30%. Project power unit
Name and technical characteristics of construction and installation works, machinery and equipment																												Unit of measurement of project capacity						Maximum allowable cost for calculating subsidies per unit of capacity, tenge
The greenhouse complex should include: autonomous sources of thermal energy (if necessary), a thermal accumulator, a heating and climate control system, an automatic air humidification system, supplementary lighting (if necessary), carbon dioxide production, shading equipment, soilless cultivation technology on an artificial substrate (in the absence of soil for cultivation), automatic systems for small-volume crop cultivation (drip irrigation, nutrient solution preparation units, water treatment):																												1 hectare
1. Film/polycarbonate coating: 1.1. Construction.																																		288,966,000 (during construction)
1. 2. Expansion.																																		144,483,000 (when expanding)
2. Glass coating:
2.1. Construction																																		540,845,000 (during construction)
2.2. Expansion																																		270,422,500 (when expanding)
Note: The cost of an investment project shall be determined in accordance with the design and estimate documentation. If the project only provides for the purchase and installation of certain types of equipment without the development of design and estimate documentation, subsidizing of the purchased equipment shall be permitted within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of reimbursement of investment from the cost of equipment under purchase and sale (leasing) contracts, contracts for the supply and (or) installation of equipment, as well as related documents (customs declaration, invoices, documents confirming payment).
Project passport № 13 "Establishment of an intensive apple orchard of 5 hectares or more"
The share of investments reimbursement is 40%.
Name and technical characteristics of machinery and equipment																																									Unit of measurement of project capacity					Maximum allowable cost for calculating subsidies per unit of capacity or equipment/machinery/equipment, tenge
The establishment of an intensive apple orchard shall be carried out using the following technology: seedlings grafted onto dwarf and semi-dwarf clonal rootstocks, including knip-baum type seedlings; the planting material must be free from diseases and pests; the number of seedlings shall range from 2,000 to 5,714 per hectare**; the use of trellis systems (supports) including tension (main) posts, intermediate posts (at least 2.0 meters above ground level), galvanized trellis wire, seedling fastening elements, tensioning devices, and anchor or bracing structures; the installation of a drip irrigation system; the use of a protective net (anti-hail or sun-shading) made of materials free from toxic elements																																									1 hectare					21 000 000
Machinery and equipment**
tractor (up to 100 horsepower)***																																									1 unit					15 000 000
specialized garden sprayer (tank capacity of at least 500 litres)																																									1 unit					4 000 000
tractor trailer (with a carrying capacity of at least 3 tons)																																														3 500 000
mounted garden cultivator																																														3 000 000
garden mower																																														4 000 000
fertilizer applicator																																														5 500 000
fruit picking machine***																																														32 090 000
pruning equipment																																														3 000 000
mechanical thinning machine																																														4 115 000
Note:* subsidizing of protective net (anti-hail, sun protection) is carried out upon installation within four years of orchard establishment; this condition does not require installation of protective net at the beginning of orchard establishment; purchase of agricultural machinery and equipment (if necessary); *the minimum land standard for intensive apple orchard, when subsidizing the first unit of machinery, is from 5 to 20 hectares. Subsidizing of the second unit of machinery of the same type shall be carried out if the minimum standard of 20 hectares is exceeded by 50% or more. The availability of land areas corresponding to the minimum standard for intensive apple orchard shall be confirmed by the deed of ownership of the land plot and (or) the deed of the right of temporary (long-term, short-term) land use (lease). When expanding plantings, if the area of the previously planted apple orchard by the investor is at least 5 hectares, the establishment of an apple orchard of less than 5 hectares is subsidized. Saplings subsidized under these Rules shall not be subsidized under the Rules for subsidizing increases in crop yield and quality (hereinafter - the Rules for subsidizing increases in crop yield), approved by Order № 107 of the Minister of Agriculture of the Republic of Kazakhstan dated March 30, 2020 (registered in the Register of state registration of regulatory legal acts № 20209), nor are saplings subsidized under the Rules for subsidizing increases in crop yield.
Project passport № 14 "Planting fruit and berry crops and grapes over 5 hectares"
The share of investments reimbursement is 30%.
Name and technical characteristics of machinery and equipment																																	Unit of measurement of project capacity											Maximum allowable cost for calculating subsidies per unit of capacity or /machinery/ vehicles/equipment, tenge
Planting of fruit and berry crops and grapes shall be carried out using the following technology: using seedlings on medium- and tall rootstocks, planting material must be free of diseases and pests; using trellises (supports), including tension (main) posts, intermediate posts (at least 2 meters above ground level), using galvanized trellis wire, elements for fastening seedlings to the trellis, tension devices, anchor or support structures (if necessary); using a drip irrigation system (except for the Aport apple variety); with the number of seedlings per 1 hectare***: pome fruit crops - from 500 to 2,000 pieces; stone fruit crops - from 200 to 2,000 pieces; nut crops from 100 to 500 pieces; grapes - from 1,150 to 2,667 pieces; berry crops - up to 40,000 pieces per 1 hectare.																																	1 hectare											9 889 000
using domestic seedlings:																																												1,535,000 (fruit pome crops);
																																												1,767,000 (stone fruit crops);
																																												1,847,000 (grapes); 4,500,000 (berry crops).
using imported seedlings																																												4,887,000 (fruit pome crops); 8,668,000 (stone fruit crops); 1,841,000 (nut crops); 3,945,000 (grapes); 4,622,000 (berry crops);
using a protective net (anti-hail, sun protection) made of material that does not contain toxic elements (except for nut and berry crops) *																																	1 hectare											2 157 000
using a trellis system that includes trellises (support posts) and elements for attaching the seedling to the trellis																																	1 hectare											1 071 428
Machinery and equipment**
tractor (up to 100 horsepower) ***																																	1 unit											13 610 000
specialized garden sprayer (tank capacity of at least 500 liters)																																												3 085 000
tractor trailer (with a carrying capacity of at least 3 tons)																																												3 120 000
mounted garden cultivator																																												3 312 000
garden mower																																												4 324 000
fertilizer applicator																																												5 129 000
fruit picking machine***																																												32 090 000
pruning equipment																																												3 000 000
mechanical thinning machine																																												4 115 000
Note: protective net (anti-hail, sun protection) shall be subsidized upon installation within four years of orchard establishment; under this condition, installation of protective net at the beginning of orchard establishment is not required; * purchase of agricultural machinery and equipment (if necessary); ***minimum standard of land for fruit and berry crops and grapes when subsidizing the first unit of machinery is from 5 to 20 hectares. Subsidizing the second unit of machinery of the same type shall be carried out if the minimum standard of 20 hectares is exceeded by 50% or more. Availability of lands corresponding to the minimum standard for fruit and berry crops and grapes shall be confirmed by the deed of ownership of the land plot and (or) the deed of the right of temporary (long-term, short-term) land use (lease). When expanding plantings, if the area previously planted by the investor (service recipient) for fruit, berry, and grape crops is at least 5 hectares, the planting of fruit, berry, and grape crops on an area of less than 5 hectares shall be subsidized. Seedlings subsidized under these Rules shall not be subsidized under the yield increasing subsidies Rules, just as seedlings subsidized under the yield increasing subsidies Rules are not subsidized under the Rules.
Project passport № 15 "Establishment and expansion of poultry meat production facilities with a power output of 5,000 tons per year"
The share of investments reimbursement is 25%.
№					Name and technical characteristics of construction and installation works, machinery and equipment																																		Unit of measurement of project capacity						Maximum allowable cost for calculating subsidies per unit of capacity, tenge
1					A poultry farm with process equipment, buildings, and structures: floor/cage equipment for housing birds, an automated feeding, watering, microclimate, water supply, ventilation and heating system, lighting, a slaughterhouse, a veterinary unit, an incubator, a feed mill, refrigeration equipment, a waste processing system, and the necessary machinery and equipment for facility maintenance. The cost of the investment project shall be determined according to the design and estimate documentation: during construction and during expansion.																																		1 тонна мяса птицы в год 1 ton of poultry meat per year
					during construction																																								520 000
					when expanding																																								260 000
Note: Projects for the establishment and expansion of poultry production facilities with an initial capacity of 2,000 tons per year shall be subsidized for phased implementation. If the investment project only involves the purchase and installation of individual equipment without the development of design and estimate documentation, the purchased equipment shall be subject for subsidies within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of equipment under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, and accompanying documents (customs declaration, invoices, payment confirmation documents). If the enterprise has a feed mill and/or a mobile feed mill, there is no need to build a feed mill.
Project passport № 16 "Establishment of a breeding and hybrid Centre with a power output to produce and raise 1,200 hybrid sows"
The share of investments reimbursement is 25%.
Name and technical characteristics of construction and installation works, machinery and equipment																													Unit of measurement of project capacity											Maximum allowable cost for calculating subsidies per unit of capacity, tenge
A breeding and hybrid centre with equipped buildings for pig housing, a veterinary and sanitary unit, a slaughterhouse, a weighing station, refrigeration equipment, an automated feeding system, water supply, ventilation, heating, and manure removal, a genetic laboratory, and the necessary equipment for facility maintenance. The cost of the investment project shall be determined according to the design and estimate documentation.																													the place of the sow											2 500 000
Project passport № 17 "Establishment and expansion of pig breeding facilities with a power output of 1,000 sows"
The share of investments reimbursement is 25%.
Name and technical characteristics of construction and installation works, machinery and equipment																																			Unit of measurement of project capacity								Maximum allowable cost for calculating subsidies per unit of capacity, tenge
A pig-breeding complex with equipped buildings for pig housing, a veterinary centre, an automated feeding system, water supply, manure removal, ventilation and heating, a slaughterhouse and waste processing system, a weighing station, refrigeration equipment, and the necessary machinery and equipment for facility maintenance. The cost of the investment project shall be determined according to the design and estimate documentation: for construction/expansion, and for modernization.																																			the place of the sow								1 700 000 850 000
Note: If the investment project provides only for the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the limits of the established maximum permissible cost for calculating subsidies per unit of capacity and the share of reimbursement of investment from the cost of equipment under purchase and sale (leasing) agreements, contracts for the supply and (or) installation of equipment, as well as accompanying documents (customs declaration, invoices, documents confirming payment).
Project passport № 18 "Establishment of a feed mill"
The share of investments reimbursement is 25%.
№							Name and technical characteristics of construction and installation works, machinery and equipment																													Unit of measurement of project capacity									Maximum allowable cost for calculating subsidies per unit of capacity or machinery/equipment, tenge
1							A feed mill (workshop) with a power output of 3 tons of feed/pellet feed per hour, including the feed mill building (workshop), grain storage facilities (silo buildings), a production unit, warehouses for raw materials and finished products with shipment by road and/or rail, process equipment for the feed mill, warehouses and silos, and the necessary machinery and transport. The cost of the investment project shall be determined according to the design and estimate documentation: during construction; during expansion																													1 ton per hour									270 000 000 135 000 000
2							Mobile feed mill with capacity from 15 tons per hour, including suction valve, hammer crusher, grain crusher, rotary compressor, weigh mixer, aspiration, suction nozzle, discharge auger, rotary auger, combination sluice, loading hopper, loading auger, air unloading line, dosing tank for feed oil.																													1 unit									100 000 000
2.1							Tractor for moving a feed mill																																						23 000 000
Note: If the investment project provides only for the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the limits of the established maximum permissible cost for calculating subsidies per unit of capacity and the share of reimbursement of investment from the cost of equipment under purchase and sale (leasing) agreements, contracts for the supply and (or) installation of equipment, as well as accompanying documents (customs declaration, invoices, documents confirming payment).
Project passport № 19 "Acquisition of machinery and equipment for processing poultry manure, with a power output of 50 tons per day"
The share of investments reimbursement is 25%.
Name and technical characteristics of machinery and equipment											Unit of measurement of project capacity	Maximum allowable cost for calculating subsidies per unit of capacity, tenge
Composting manure:
Stirrer											1 unit	108,200,000
front loader												5,600,000
Drying manure:
Fertilizer drying equipment											1 ton of processed manure/day	466,700
Biogas plant:
Biogas plant											1 ton of processed manure/day	11,600,000
Machinery and equipment for all processing methods:
Spreader											1 unit	25,000,000
Fertilizer packaging and packing equipment											1 ton/day	666 670
Project passport № 20 "Establishment and expansion of a breeding farm for egg and meat poultry farming"
The share of investment reimbursement is 40%.
№										Name and technical characteristics of construction and installation works, machinery and equipment																				Unit of measurement of project capacity												Maximum allowable cost for calculating subsidies per unit of capacity, tenge
Construction and installation works:
1.1										Poultry house for the grandparent/parent flock																				1 square meter												208 000
1.2										Replacement poultry houses																																156 000
1.3										A complex of veterinary facilities in accordance with paragraphs 17.1.2 and 17.1.3 of SNiP RK 3.02-11 “Livestock, poultry and fur farming buildings and premises” provided for in the design and estimate documentation																																200 000
1.4										Slaughterhouse building (not mandatory if the investor (service recipient) has an existing facility or if there is a concluded outsourcing agreement for poultry slaughter)																																123 000
1.5										Hatchery (not mandatory if the breeder specializes in the production and sale of hatching eggs)																																162 000
2										Equipment:
2.1										Floor equipment for rearing replacement young stock (watering system, feeding system, heating system, ventilation, lighting, water supply)																				For one bird-place												25 000
2.2										Cage equipment for rearing replacement young stock (watering system, feeding system, heating system, ventilation, lighting, water supply)																				For one bird-place												42 500
2.3										Floor equipment for keeping grandparent/parent flocks ( egg collection system , drinking system, feeding system, heating system, ventilation, lighting, water supply)																				For one bird-place												42 500
2.4										Cage equipment for keeping grandparent/parent stock ( egg collection system , drinking system, feeding system, heating system, ventilation, lighting, water supply)																				For one bird-place												35 000
3										Waste disposal equipment - Crematorium																				1 unit												12 500 000
4										Incubator equipment																				one egg place												8 800
5										Slaughterhouse equipment																				1 unit												53 000 000
6										Technique:
6.1										Feed truck																				1 единица												35 000 000
6.2										Chicken truck																																40 000 000
6.3										Refrigerated egg carrier																																15 000 000
6.4										Electric forklift/diesel forklift																																12 500 000
6.5										Skid steer loader																																8 000 000
6.6										Front loader																																5 600 000
6.7										Mobile disinfection unit																																12 000 000
7										Diesel power plant/diesel generator set																				1 единица												22 000 000
Note: The cost of the investment project shall be determined in accordance with the design and estimate documentation.
Project passport № 21 "Construction and expansion of grain storage facilities"
The share of investments reimbursement is 25%.
Name and technical characteristics of construction and installation works, machinery and equipment																																			Unit of measurement of project capacity									Maximum allowable cost for calculating subsidies per unit of capacity, tenge
Expansion of a grain storage facility for oilseeds with equipment that provides the following grain operations: receiving, processing, cleaning, handling, drying, storage, internal handling and loading, from 5,000 tons of storage capacity.																																			1 ton									20 137
Construction of a grain storage facility with equipment that ensures the following grain operations: receiving, processing, cleaning, handling, storage, internal movement and loading, but not more than 10,000 tons.																																			1 ton									33 800
Note: The cost of an investment project shall be determined according to design and estimate documentation. If the project only involves the purchase and installation of certain types of equipment without the development of design and estimate documentation, subsidies for the purchased equipment shall be permitted within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investment reimbursement from the cost of the equipment under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, and accompanying documents (customs declarations, invoices, and payment confirmations).
Project passport № 22 "Construction and expansion of potato and vegetable storage facilities with a power output of 1,000 tons or more"
The share of investments reimbursement: - with refrigeration equipment – 50 %; - with ventilation equipment – 40 %
Name and technical characteristics of construction and installation works, machinery and equipment														Unit of measurement of project capacity								Maximum allowable cost for calculating subsidies per unit of capacity or machinery/equipment, tenge
construction														1 ton
expansion																						85 225
Refrigerated truck (vehicle with refrigeration equipment for transporting fruit and vegetable products) with a carrying capacity of 20 tons: tractor unit*																						42 613
Forklift truck *														1 unit								52 841 071
Plastic containers**														1 unit								5 091 426
Potato and vegetable storage facilities must include: refrigeration equipment (if necessary), ventilation equipment, and warehouse equipment.														1 unit								50 000
The share of investments reimbursement for combined climate control (with refrigeration and ventilation equipment) is 40%. subsidized at a rate of 3 units per 1,500 tons of storage **The capacity of one container is 200 kilograms or more. No more than three plastic containers per ton of storage are subsidized. The cost of an investment project shall be determined according to design and estimate documentation. If the project only involves the purchase and installation of certain types of equipment without the development of design and estimate documentation, subsidies for the purchased equipment shall be permitted within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investment reimbursement from the cost of the equipment under purchase and sale (leasing) agreements, equipment supply and/or installation agreements, and accompanying documents (customs declarations, invoices, and payment confirmations).
Project passport № 23 "Construction and expansion of fruit storage facilities with a power output of 1,000 tons*"
The share of investments reimbursement is 40%
Name and technical characteristics of construction and installation works, machinery and equipment																							Unit of measurement of project capacity																Maximum allowable cost for calculating subsidies per unit of capacity or machinery/equipment, tenge
A fruit storage facility without a controlled gas environment must include: ventilation equipment, refrigeration equipment, and warehouse equipment.
Construction																																							73 422
Expansion																																							36 711
A fruit storage facility with a controlled gas environment must include: a controlled gas environment, refrigeration equipment, and warehouse equipment.																							1 ton
Construction																																							257 270
Expansion																																							128 635
Refrigerated truck (vehicle with refrigeration equipment for transporting fruit and vegetable products)**																							1 unit
lifting capacity from 1.5 to 5 tons																																							9 239 000
lifting capacity from 5 to 10 tons																																							19 713 000
with a lifting capacity of 10 tons																																							27 283 000
with a lifting capacity of 20 tons: tractor unit refrigerated semi-trailer																																							52 841 071 29 145 000
Forklift truck																							1 unit																5 091 426
Plastic containers***.																							1 unit																50 000
Corrugated packaging line																							1 unit																25 200 000
Corrugated cardboard production line ****																							1 million square meters																72 207331
Sorting and packaging equipment *****																							1 ton/hour																34 663 530
Note: The cost of the investment project shall be determined in accordance with the design and estimate documentation. * Fruit storage technologies can be combined, if necessary: with or without a controlled atmosphere. The total capacity is taken into account when calculating. When subsidizing, the number of vehicles on the balance sheet at the subsidy date and the capacity of the fruit storage facility are taken into account. No more than 8 refrigerated vehicles per 1,000 tons of storage capacity shall be subsidized. * The capacity of one container is 300 kilograms or more. No more than three plastic containers per ton of storage are subsidized. Corrugated cardboard production line (corrugator), corrugated packaging production line (flexo printing, slotter, rotary die-cutting), rotary die-cutting dies, steam generator, compressors, warehouse equipment (including a forklift with a roll gripper), finished product strapping equipment, and waste compaction equipment. Fruit storage facilities with a storage capacity of 10,000 tons or more shall be subsidized. ***** Sorting and packaging equipment shall be subsidized at a rate of 1 ton/hour per 800 tons of storage capacity. Equipment, containers, and transport may be purchased and subsidized outside of the expansion of the current fruit storage capacity, but not exceeding the maximum standards per 1 ton of storage. If the investment project only provides for the purchase and installation of certain types of equipment and machinery without the development of design and estimate documentation, the purchased equipment shall be subject for subsidies within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investment reimbursement from the cost of the equipment, under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, as well as accompanying documents (customs declaration, invoices, documents confirming payment).
Project passport № 24 "Establishment and expansion of a fruit/vegetable/melon processing enterprise"
The share of investment reimbursement is 25%.
Name and technical characteristics of construction and installation works and equipment																		Unit of measurement of project capacity							Maximum allowable cost for calculating subsidies per unit of capacity, tenge
An enterprise for the processing of fresh fruits, vegetables, and melons, equipped with the necessary machinery and equipment for the production of one or more types of juice and/or fruit and vegetable products. Conditions for calculating subsidies:
when constructing an enterprise with a processing capacity of 1 ton per hour of raw materials																		1 ton/hour							188 333 300
when expanding an existing enterprise with a processing capacity of 1 ton per hour of raw materials																									53 333 300
Note: The cost of an investment project shall be determined according to design and estimate documentation. If the investment project only involves the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject for subsidies within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investment reimbursement from the cost of equipment under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, and accompanying documents (customs declarations, invoices, and payment confirmations).
Project passport № 25 "Construction of a potato processing plant"
The share of investments reimbursement is 25%.
Name and technical characteristics of construction and installation works and equipment																										Unit of measurement of project capacity				Maximum allowable cost for calculating subsidies per unit of capacity, tenge
A potato processing plant includes a production complex with the necessary equipment for the production of one or more types of potato products (potato chips, French fries, semi-finished products, etc.). The cost of the investment project shall be determined according to the design and estimate documentation: construction from 140,000 tons per year of raw materials.																										per an enterprise				10 588 666 600
Project passport № 26 "Establishment and expansion of an enterprise for the production of fat and oil products"
The share of investments reimbursement is 25%.
Name and technical characteristics of construction and installation works and equipment													Unit of measurement of project capacity								Maximum allowable cost for calculating subsidies per unit of capacity, tenge
An enterprise with the necessary equipment for processing oilseeds and (or) producing oil and fat products.
Conditions for calculating subsidies: during the construction of an enterprise with a processing capacity of oilseeds from 500 tons per day													1 ton/day								8 313 471
*when constructing an enterprise with a processing capacity of oilseeds of 100 tons per day by an agricultural cooperative																					9 987 336
when expanding an existing enterprise with a processing capacity of oilseeds from 100 tons per day																					3 902 360
when expanding an existing enterprise with a power output of 100 tons per day of raw materials for the production of edible oil and fat products, with the exception of vegetable oil																					18 764 052
Construction of a plant with the necessary equipment for processing vegetable and animal fats for the production of non-edible oil and fat products (granules) with a power output of 3 tons per day													1 ton/day								207 100 416
Note: The cost of an investment project shall be determined according to design and estimate documentation. If the investment project only involves the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of equipment under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, and accompanying documents (customs declarations, invoices, and payment confirmations). *Within the framework of this project passport, no more than one application from one agricultural cooperative shall be subsidized. From January 1, 2026, the reimbursement of the investments part in investment projects for the establishment of new production capacities will be excluded. Moreover, for investment projects that were put into operation and received investment subsidies for the first tranche before January 2026, it is permitted to receive investment subsidies for the second tranche after January 1, 2026, in accordance with subparagraph 2 of paragraph 16 of these Rules.
Project passport № 27 "Establishment and expansion of an enterprise for the production of processed grain products"
The share of investment reimbursement is 25%.
№	Name and technical characteristics of construction and installation works and equipment																								Unit of measurement of project capacity										Maximum allowable cost for calculating subsidies per unit of capacity, tenge
1	An enterprise for grain processing, equipped with the necessary equipment for the production of one or more types of cereal products and/or dry breakfast products. Conditions for calculating subsidies:
	during the construction of a plant with a processing capacity of 2 tons per hour of raw materials for the production of cereal products																								1 ton/day										838 241 450
	when expanding an existing enterprise with a processing capacity of 2 tons per hour of raw materials for the production of cereal products																																		102 818 435
	during the construction of a plant with a power output of 0.2 tons per hour for the production of dry breakfast cereals																								1 ton/day										1 500 000 000
	when expanding an existing enterprise with a power output of 0.2 tons per hour for the production of breakfast cereals																																		1 200 000 000
2	A grain/flour processing plant for pasta production with the necessary equipment for the production of one or more product types. Conditions for calculating subsidies:
	when constructing an enterprise with a processing capacity of 1 ton per hour of raw materials																								1 ton/day										600 000 000
	when expanding an existing enterprise with a processing capacity of 1 ton per hour of raw materials																																		512 244 000
	during the construction of a gluten-free pasta production plant with a power output of 0.2 tons per hour																								1 тонна/час										1 212 146 835
Note: The cost of an investment project shall be determined according to design and estimate documentation. If the investment project only involves the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of equipment under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, and accompanying documents (customs declarations, invoices, and payment confirmations).
Project passport № 27.1 "Establishment and expansion of an enterprise for deep processing of plant products"
№					Name and technical characteristics of construction and installation works and equipment																											Unit of measurement of project capacity										Maximum allowable cost for calculating subsidies per unit of capacity, tenge
The share of investments reimbursement for the production of products of high technological complexity* is 50% (while the share of investments reimbursement for the production of products not classified as products of high technological complexity in the full technological cycle is 25%); The share of investments reimbursement for the production of products not classified as high-tech products is 25%.
1					An enterprise with the necessary equipment for the production of one and (or) more types of deeply processed products. Conditions for calculating subsidies:
					during the construction/expansion of an existing enterprise for deep processing of grain crops (except for processing grain for the production of commercial flour), with a power output of 170 tons of raw materials per day																											1 ton/day										9 000 000
					during the construction/expansion of an existing enterprise for deep processing of oilseeds, with a power output of 7 tons/day for the main finished product																											1 ton/day										563 386 533
Note: The cost of an investment project shall be determined according to design and estimate documentation. If the investment project only involves the purchase and installation of certain types of equipment without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investment reimbursement from the cost of equipment under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, and accompanying documents (customs declarations, invoices, and payment confirmations). *Subsidies shall be provided for the production of the following products of high technological complexity: Modified starches; Glucose and glucose syrup; Fructose and fructose syrup; Maltose and maltose syrup; Maltodextrin; Protein concentrates (protein); Soy isolate; Citric acid; Lecithin and plant phospholipids; Amino compounds containing an oxygen-containing functional group, except lysine and glutamic acid; Lysine, glutamic acid and their salts. The list of high-tech products has been compiled in accordance with the Methodology for assessing the level of processing of goods for inclusion in the list of priority goods, approved by Order № 273 of the Minister of Industry and Infrastructure Development of the Republic of Kazakhstan dated May 20, 2022 (registered in the Register of state registration of regulatory legal acts № 28242).
Project passport № 28 "Establishment and expansion of a sugar production enterprise"
The share of investments reimbursement is 40%.
Name and technical characteristics of construction and installation works, machinery and equipment																										Unit of measurement of project capacity											Maximum allowable cost for calculating subsidies per unit of capacity, tenge
1. A sugar beet processing plant with the necessary equipment for receiving and processing raw materials. Conditions for calculating subsidies:
when constructing a plant with a processing capacity of 5,000 tons of raw materials per day																										1 ton/day											8 750 000
when expanding an existing plant with a processing capacity of 1,600 tons per day of raw materials																																					3 615 384
2. Beet collection point:
automobile scales																										1 ton											97 125
equipment for a raw materials laboratory																										1 unit											330 000
cleat laying machine																										1 ton/hour											767 148
active ventilation equipment																										1 ton/hour											83 000
3. Line for processing pulp (pressing)																										1 ton/day											106 783
Pulp processing line (granulation)																										1 ton/day											2 082 753
Note: The cost of the investment project shall be determined according to the design and estimate documentation. If the investment project only involves the purchase and installation of certain types of equipment and machinery without the development of design and estimate documentation, the purchased equipment and machinery shall be subject to subsidies within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of equipment and machinery under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, and accompanying documents (customs declarations, invoices, and payment confirmations).
Project passport № 29 "Expansion of an enterprise for the production of bakery and/or confectionery products with a power output of 2,000 tons of products per year"
The share of investments reimbursement is 25%. Project power unit
Name and technical characteristics of construction and installation works, machinery and equipment													Unit of measurement of project capacity												Maximum allowable cost for calculating subsidies per unit of capacity, tenge
Line for the production of bakery and/or confectionery products													1 ton of finished product/year												2 040 000
Note: The cost of the investment project shall be determined according to the design and estimate documentation. If the investment project only involves the purchase and installation of certain types of equipment and machinery without the development of design and estimate documentation, the purchased equipment shall be subject to subsidies within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of the equipment under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, and accompanying documents (cargo and customs declaration, invoices, and payment confirmation documents).
Project passport № 30 "Expansion of poultry egg farms with increased production capacity from 50 million eggs per year"
25 % The share of investments reimbursement is 25%.
Name and technical characteristics of the equipment																Unit of measurement of project capacity												The maximum permissible cost for calculating subsidies per unit of capacity, equipment, and machinery, tenge
Poultry house for laying hens																per 1 square meter of one poultry house												57 160
Poultry house																												62 560
Egg warehouse																per 1 square meter												80 400
Infrastructure and design and estimate documentation																												302 343 584
Equipment:
Technological equipment - cage equipment for keeping replacement young animals																one place for a bird												1 790
Technological equipment - cage equipment for keeping industrial layers																one place for a bird												2340
Egg grading machine 90,000 eggs/hour																1 unit												352 296 000
Egg grading machine 45,000 eggs/hour																												187 886 250
Equipment for slaughtering poultry up to 1,500 heads/hour																												53 020 468
Equipment for processing slaughter waste																												29 568 000
Refrigeration equipment																												23 988 000
Technique:
Feed truck																1 unit												21 518 000
Refrigerated egg carrier																												14 000 000
Tractor																												6 855 000
Forklift																												11 250 000
Front loader																												8 000 000
Truck																												17 273 000
Project passport № 31 "Purchase of equipment for agrochemical laboratories for soil analysis"
The share of investments reimbursement is 25%.
№		Name and technical characteristics of machinery and equipment																													Maximum allowable cost for calculating subsidies, tenge
1		A laboratory for agrochemical analysis of soils, equipped with the necessary equipment: an automatic segmented flow analyzer with an autosampler, equipment for mass sample preparation, a spectrophotometer, equipment for mass analysis of organic carbon (humus), a flame photometer with a compressor and a pressure gauge for gas, a mill for grinding soil samples, a laboratory water distiller, analytical scales, a thermostat, a drying cabinet, and exhaust equipment.																													226 625 446
2		Inductively coupled plasma atomic emission spectrometer with autosampler																													37 000 000
3		Automatic soil sampler																													9 719 000
4		Automatic laboratory dishwasher																													7 011 750
Project passport № 32 "Construction and expansion of a chicken egg processing plant"
Name and technical characteristics of construction and installation works and equipment																																							Unit of measurement of project capacity						Maximum allowable cost for calculating subsidies per unit of capacity, tenge
The share of investments reimbursement is 40%.
An egg processing plant with technological equipment, buildings and structures, infrastructure and equipment for life support systems, with the necessary machinery and equipment for servicing the facility. The cost of the investment project shall be determined according to the design and estimate documentation:																																							an egg per day
during construction																																													5 863
when expanding																																													4 667
Note: The cost of an investment project shall be determined according to design and estimate documentation. If the project only involves the purchase and installation of certain types of equipment without the development of design and estimate documentation, subsidies for the purchased equipment are permitted within the established maximum permissible cost for calculating subsidies per unit of capacity and the share of investments reimbursement from the cost of the equipment under purchase and sale (leasing) contracts, equipment supply and/or installation contracts, and accompanying documents (customs declarations, invoices, and payment confirmations).


	Annex 4 to the Subsidy Rules for Reimbursement of a Part of the Expenses Incurred by an Agro-Industrial Complex Entity, in the Context of Investments

Form

Application for investment subsidizing

Footnote. Annex 4 as amended by the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160 (shall be enforced upon expiry of ten calendar days after its first official publication).

To ______________________________________________________________________________

(full name of the local executive body of the region, city of republican significance, capital)

from _____________________________________________________________________________

(full name of the legal entity, surname, name, patronymic (if any) of an individual)

I kindly request to pay me the sum of investment subsidizing amounted to

_______________________________________________ tenge under the project passport №_______

(amount in figures and words)

"______________________________________________________________________________"

(full name of the project passport)

in accordance with the Rules for subsidizing the reimbursement of part of the expenses incurred by an entity in the agro-industrial complex, with investment investments, approved by the Order of he Acting Minister of Agriculture of the Republic of Kazakhstan

dated July 23, 2018 № 317 (registered in the Register of State Registration of Regulatory Legal Acts № 17320) (hereinafter referred to as the Rules).

1. Information about the investor.

For a legal entity/branch, representative office:

name _______________________________________________________________

business identification number (hereinafter referred to BIN)

_________________________________________

surname, name, patronymic (if any) of the head

____________________________________________________________________

address ___________________________________________________________

phone (fax) number _______________________________________________

class according to CCЕA(code according to the Common Classifier of Economic Activities)

according to Annex 1 to the Rules ____________________

for individual:

surname, name, patronymic (if any)

___________________________________________________________________

individual identification number (hereinafter - IIN)

________________________________

identity document:

№ _________________________________________________________

issued by _____________________________________________________

date of issue ____________________________________________________

address __________________________________________________________

phone number ________________________________________

class according to CCЕA(code according to the Common Classifier of Economic Activities)

according to Annex 1 to the Rules ______________________

2. Notification of commencement of activity as an individual entrepreneur:

location ________________________________________________

date of notification________________________________________________.

3. Information on members of an agricultural cooperative (if the investor is an agricultural cooperative) agricultural cooperative):

Item №	Name of the member of an agricultural cooperative	BIN/IIN of the member of an agricultural cooperative
1	2	3

4. Information about land plots (in case there are requirements in the project passport on the availability of agricultural land):

Item №	Cadastral number	Total area, hectare	including arable land	Intended purpose	Name and BIN/IIN of the owner of the land plot or a land user
1	2	3	4	5	6

5. Information on the presence of farm animals (if there are requirements in the farm animals project passport):

Item №	Identification number	Type of farm animal	Sex	age-sex group	Name and BIN/IIN of the owner of the farm animal
1	2	3	4	5	6

6. Information about the investment project:

description _______________________________________________________

amount of investments ____________________________________________

source of financial resources at the expense of which the project is implemented

__________________________________________

estimated amount of subsidies ________________________________________

address of implementation of the investment project

6-1. Information about the financial institution:

Name of the financial institution ______________________________

a certificate from a financial institution indicating the account details for the transfer of investment subsidies _________________________________________

7. Preliminary calculation of due subsidies ____________________.

8. Decision of the working body on the compliance of the investment project with the conditions of the Rules (if the investor has previously submitted an application at the first stage)_______________________________________.

9. Act of acceptance of the investment project object into operation (during creation of new, reconstruction, expansion of production capacities) in accordance with the legislation of the Republic of Kazakhstan __________________.

10. Certificate of commissioning of equipment between the buyer and the supplier (when equipment is purchased)

__________________________.

11. Sale and purchase agreements, invoices for purchased goods, works, services, confirming investments for creation of new, reconstruction, expansion of production capacities, documents confirming payment __________________________________.

12. Design and estimate documentation that has a positive conclusion from the project examination in accordance with the legislation of the Republic of Kazakhstan (according to the project passports for which subsidies are provided in accordance with the design and estimate documentation) ________________________.

13. Acceptance and transfer certificates for agricultural, special machinery and technological equipment

_______________________________________.

14. Credit/lease agreements (in case of investment investments made using funds raised from financial institutions) ________________________________________________________.

15. Supporting documents: business plan, electronic/paper invoices for the sale of finished products

(in case of filing an application for the second tranche) ________________________________________

16. Information on achieving a production capacity utilization rate of at least 50 (fifty)% in accordance with part two of paragraph 16 of the Rules (filled out when submitting an application within the second tranche).

Item №	Name of type of products	Measuring unit	Total production in kind during the reporting quarter	Output of products (goods, services) in value terms for the reporting quarter, thousand tenge
1	2	3	4	5

Table continued

Products used for own needs (intra-plant turnover) during the reporting quarter		Products manufactured from customer-supplied raw materials during the reporting quarter		Balances of finished products at the end of the reporting period in physical terms
In kind	in value terms, thousands of tenge	In kind	in value terms, thousands of tenge
6	7	8	9	10

17. The completed project passport is attached.

I confirm the reliability of the information provided, I am aware of the responsibility for submitting false information in accordance with the legislation of the Republic of Kazakhstan and I give my consent to the use of information constituting a secret protected by law, as well as the collection, processing, storage, uploading and use of personal data, uploading and use of personal data.

I confirm that I/we as an investor comply with the requirements of paragraph 6 of the Rules.

I confirm that no liquidation, rehabilitation or bankruptcy procedures have been initiated against me/us,

and that my/our activities have not been suspended in accordance with the legislation of the Republic

of Kazakhstan.

In the event that during the audit any inconsistencies in the information provided are detected, as well as in the event of failure to comply with the requirements of paragraph 39 of the Rules, I undertake to return the illegally obtained funds within ten working days.

I hereby give my consent to increase the amount of investment subsidy in case of allocation of additional funds within the framework of paragraph 17 of the Rules.

Signed and sent by the investor at ___ hours "__" _____ 20__:

Data from the electronic digital signature (hereinafter referred to as EDS)

Date and time of signing the EDS

Notification of acceptance of the application:

Accepted by the working body at ___ hours "__" ______ 20__:

Data from the EDS

Date and time of signing the EDS

Annex 5
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Form

Application
for investment subsidies using the mechanism of advance payment to a special account

To _______________________________________________________________

(full name of the local executive body of the region,

the city of republican significance, the capital)

from ________________________________________________________________

(full name of a legal entity, surname, name, patronymic

(if any) of an individual)

Hereby, I request you to consider the investment project under the project passport № _____

"__________________________________________________________________"

(full name of the project passport)

for compliance/non-compliance with the terms of the Rules for subsidizing of reimbursement

of part of the expenses incurred by the subject of the agro-industrial complex while investing,

approved by the Order of the Acting Minister of Agriculture of the Republic of Kazakhstan

dated July 23, 2018 № 317 (registered in the Register of state registration of regulatory legal

acts under № 17320) (hereinafter referred to as the Rules).

1. Information about the investor.

for a legal entity/branch, representative office:

name ______________________________________________________

business identitication number (hereinafter referred to as the BIN) ________________________

surname, name, patronymic (if any) of the head __________________

address ______________________________________________________________

phone (fax) number ______________________________________________

class according to CCEA (code according to the common classifier of economic activities)

according to Annex 1 to the Rules ___________________________________.

For the individual:

surname, name, patronymic (if any) ______________________________

individual identification number (hereinafter referred to as the IIN) _______________

identity document:

number _____________________________________________________________

issued by ________________________________________________________

date of issue _______________________________________________________

address _____________________________________________________________

phone (fax) number _____________________________________________.

class according to CCEA (code according to the common classifier of economic activities)

according to Annex 1 to the Rules __________________________________.

2. Notification of commencement of activity as a sole proprietor:

location __________________________________________________

date of notification __________________________________________________.

3. Information about members of agricultural cooperative

(in case if the investor is an agricultural cooperative):

item №	Name of a member of an agricultural cooperative	BIN/IIN of a member of an agricultural cooperative
1	2	3

4. Information about land plots

(in case of requirements in the project passport on availability of agricultural land):

item №	Cadastral number	Total area, hectare	including arable land	Intended use	Name and BIN/IIN of the land plot owner or land user
1	2	3	4	5	6

5. Information on availability of farm animals

(in case of requirements in the project passport of farm animals):

item №	Identification number	Type of farm animal	Sex	Age-sex group	Name and BIN/IIN of the owner of the farm animal
1	2	3	4	5	6

6. Information about the investment project:

description _______________________________________________________

amount of investments_______________________________________________

the source of financial resources at the expense of which the project is being implemented ___

_______________________________________________________________

estimated amount of subsidies ________________________________________

address of implementation of the investment project _________________________.

7. Preliminary calculation of subsidies payable ________________.

8. Informations on investment investments for the creation of new or upgrading existing

production capacities and terms of their realization, business plan (required only when

implementing projects in the areas of development of the processing industry),

agreements or commercial proposals

________________________________________________________________.

9. Notification of the financial institution on the investor's intention to receive

subsidies (in case of project realization at the expense of borrowed funds (credit/leasing))

________________________________________________________________.

10. A positive decision of a credit committee of the financial institution

________________________________________________________________.

11. The completed project passport is attached.

I hereby confirm the accuracy of the submitted information, I am aware of the responsibility for the submission of false information in accordance with the legislation of the Republic of Kazakhstan and I give my consent to the use of information constituting a legally protected secret, as well as to the collection, processing, storage, uploading and use of personal data.

I/we hereby confirm that no liquidation, rehabilitation or bankruptcy procedures have been initiated against me/us, and that my/our activities have not been suspended in accordance with the legislation of the Republic of Kazakhstan.

In case of detection of discrepancy of the submitted information during the check, as well as in case of non-fulfillment of the requirements of paragraph 39 of the Rules, I undertake to make a refund of illegally received funds within ten working days.

Signed and sent by the investor at ___ hours on "__" _____ 20__:

Data from the electronic digital signature (hereinafter referred to as the EDS)

Date and time of signing the EDS

Notification of acceptance of application:

Accepted by the working body at ___ hours "__" ______ 20__:

Data from the EDS

Date and time of signature of the EDS

Annex 6
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Form

Act of inspection of the investor's facility and certification
of achieving the capacity utilization dated ______ 20 №_

_________________________________________________________________

Name of region (the city of republican significance, the capital)

Name of investor: __________________________________________

Name of the passport of the project: ____________________________________

Location of facility: __________________________________________

The group of specialists, created on the basis of _______________________

dated ____20__ №___________, consisting of

1._________________________________

2._________________________________

during the inspection of the object, revealed the following:

_________________________________________________________________

Inspection conclusions:

_________________________________________________________________

Signatures of persons carrying out the inspection:

1. ______________________________________

________________________________________

(Surname, name, patronymic (if any))

(signature)

2. ______________________________________

Signature of investor (investor's representative):

________________________________________

(Power of attorney №___ dated __________________)

Annex 7
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Form

Notice of restriction of access by a member of a group
of professionals in a state subsidy informational system

city ______

"___" _______ 20__

Hereby I, the head of the working body ___________________________________

_____________________________________________________________________

(name of the working body and surname, name, patronymic (if any) of the head)

on the basis of the document ________________________________________________

(an order on granting vacation or assignment or dismissal or during a period of temporary incapacity for work)

№____ dated "___" _______ 20__ have made this act as follows:

The member of the group of specialists _____________________________________________

(surname, name, patronymic (if any))

is restricted access for a period from____________ to __________ (date and time)

The content of this act is verified by personal signatures:

1. ___________________________________________________________________

(surname, name, patronymic (if any) of the employee of the working body responsible for

for the implementation of investment subsidies) (date and time, electronic digital signature)

2. ___________________________________________________________________

(surname, name, patronymic (if any) of the member of the group of specialists)

(date and time, electronic digital signature)

Annex 8
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

List of basic requirements for the provision of the state service "Subsidizing on reimbursement of a part of expenses incurred by the subject
of agro-industrial complex in the course of investment investments"

Footnote. Annex 8 as amended by the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160 (shall be enforced upon expiry of ten calendar days after its first official publication).

1	Name of the service provider	Local executive bodies of regions, cities of Astana, Almaty and Shymkent (hereinafter referred to as the service provider).
2	Methods of provisions of state service	Acceptance of applications and issuance of the results of the provision of state services shall be carried out through the web portal of "electronic government" www.egov.kz (hereinafter referred to as the portal).
3	The term for the provision of state service	14 (fourteen) working days.
4	Form of provision of state services	Electronic (partly automated).
5	The result of the provision of state service	Investment subsidizing agreement signed by the working body (service provider) or motivated refusal to provide the state service
6	The amount of payment charged from the service recipient in the provision of state services, and methods of its collection in cases provided for by the legislation of the Republic of Kazakhstan	For free.
7	Working hours of the service provider and information facilities	Portal - around the clock, except for technical breaks associated with the repair work (when the service recipient contacts after the end of working hours, on weekends and holidays in accordance with the labor legislation of the Republic of Kazakhstan, applications shall be accepted and the results of the state service shall be issued on the next working day). Service provider - from Monday to Friday inclusive from 9:00 to 17:30, with a lunch break from 13:00 to 14:30, except weekends and holidays in accordance with the labor legislation of the Republic of Kazakhstan.
8	List of documents and information required from the service recipient for the provision of state service	For investment projects that have not been put into operation, the service recipient shall submit an electronic application signed with an electronic digital signature (hereinafter referred to as EDS) of the service recipient, with the necessary documents specified in the application attached to it, in the PDF (Portable Document Format)" (a scanned copy of the paper version signed and stamped (if available) by the service recipient). For investment projects put into operation, as well as for actually purchased vehicles, machinery and equipment, the service recipient shall submit an electronic application signed by the service recipient's EDS, attaching the necessary documents specified in the application, in the PDF (Portable Document Format)" (a scanned copy of the paper version signed and stamped (if available) by the service recipient). Upon completion of the work, the service recipient submits an electronic application for investment subsidy using the form according to Annex 3 to the Rules of subsidizing on compensation of a part of expenses incurred by the subject of agro-industrial complex in case of investments (hereinafter referred to as the Rules), approved by the Order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated July 23, 2018 № 317 (registered in the Register of state registration of regulatory legal acts № 17320), signed EDS of the service recipient, in "PDF (Portable Document Format)" format (a scanned copy of the paper version signed and sealed (if any) by the service recipient). The following supporting, title and (or) registration documents shall be attached to the application: 1) copies of the act of acceptance of the facility of the investment project into operation (in case of creation of new production facilities or expansion of existing ones) or the act of commissioning of a start-up complex or a stage of the investment project (in cases specified in paragraph 15 of the Rules) in accordance with the form of the act of acceptance of the facility into operation, approved by the Order of the Minister for Investments and Development of the Republic of Kazakhstan dated April 24, 2017, № 234 (registered in the Register of state registration of regulatory legal acts № 15141) (hereinafter referred to as the form of the act of acceptance of the facility into operation as well as in accordance with paragraph 2 of Article 73 of the Law of the Republic of Kazakhstan " On Architectural, Urban Planning and Construction Activities in the Republic of Kazakhstan" (hereinafter referred to as the Law on Architectural, Urban Planning and Construction Activities); 2) copies of the act of putting the equipment into operation between the buyer and the supplier (when purchasing equipment); 3) copies of purchase and sale agreements, electronic and/or paper invoices (except for preferential financing programs provided without co-financing by the investor (service recipient) through subsidiaries and affiliates of the national management holding in the agro-industrial complex) for purchased goods, works, services, confirming investment for the creation of new or expansion of existing production facilities, documents confirming payment; 4) a copy of the design and estimate documentation, which has a positive conclusion of the examination of projects in accordance with Article 60 and Chapter 9-1 of the Law on Architectural, Urban Planning and Construction Activities (according to the passports of projects for which subsidies are provided in accordance with the design and estimate documentation); 5) copies of acts of acceptance and transfer of vehicles, machinery, equipment; 6) copies of credit/leasing agreements certified by a financial institution in case of making investments at the expense of funds raised in financial institutions; 7) in case of applying to receive the second tranche in accordance with subparagraph 2) of paragraph 16 of the Rules, the investor (service recipient) attaches in electronic format "PDF (Portable Document Format)" (scanned copy of the paper version) supporting documents: business plan; electronic invoices for the sale of finished products; 8) copies of the certificate of VAT registration (for AIC subjects registered under the VAT). 9) under the project passport № 4 and in case of direct (primary) water withdrawal from surface or underground sources under the project passport № 11 additionally: copy of the permit for special water use obtained according to the Rules of rendering the state service "Permit for special water use", approved by the Order of the Acting Minister of Ecology, Geology and Natural Resources of the Republic of Kazakhstan dated September 11, 2020 № 216 "On Approval of the Rules for Provision of State Services in the Field of Regulation of Water Fund Use" (registered in the Register of state registration of regulatory legal acts No 21194); 10) under the project passport № 4 additionally: copy of the document confirming the state registration of rights to the water management facility; for wells (boreholes) for arid zones - copy of information on the qualitative condition of the land plot with indication of aridity of the zones; copy of the technical passport of the water well in the form according to the Order of the Minister of Agriculture of the Republic of Kazakhstan dated June 4, 2009 № 326 "On approval of the Rules of passportization of hydromeliorative systems and water management facilities and the form of the passport" (registered in the Register of state registration of regulatory legal acts № 5714); copies of electronic invoices, payment documents confirming the fact of payment by the investor (service recipient) for the services of a contracting organization for construction and drilling of wells (boreholes), as well as the cost of pipe with indication of its thickness and diameter; copy of the Agreement concluded with the contractor; copies of the contractor's license for construction and installation works under the sub-type soil drilling works, as well as for survey activities under the sub-type field soil investigations, hydrogeological investigations; 11) a certificate from a financial institution indicating the details of the investor's (service recipient's) account for the transfer of investment subsidies in the event that the investor (service recipient) uses his/her own funds; 12) a certificate from a financial institution indicating the details of the financial institution's account for the transfer of investment subsidies to pay off the principal debt of the investor (service recipient).
9	Grounds for refusal to provide state services, established by the laws of the Republic of Kazakhstan	1) establishing the unreliability of the documents submitted by the service recipient for the receipt of the state service, and (or) the data (information) contained in them; 2) non-compliance of the service recipient and (or) the submitted materials, objects, data and information necessary for the provision of the state service with the requirements established by the Rules.
10	Other requirements, taking into account the specifics of the provision of state services, including those provided in electronic form	Addresses of places for the provision of state services are located on: 1) the Internet resource of the relevant service provider; 2) Internet resource of the Ministry of Agriculture of the Republic of Kazakhstan: www.gov.kz. The service recipient has the opportunity to receive information on the procedure and status of the provision of state services in the remote access mode through the Unified Contact Center. Contact numbers of information services on the provision of state services are indicated on the portal. Unified contact center: 1414, 8 800 080 77 77. The Ministry of Agriculture of the Republic of Kazakhstan and service providers, within three working days from the date of the change in the Rules, update information on the procedure for providing state services and send it to the Unified Contact Center.

Annex 9
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Coefficients for conversion of livestock of farm animals into a conventional head of cattle

Types of animals	Coefficients of conversion
Cattle	1
Pigs	0,3
Sheep and goats	0,1
Horses	1
Camels	1

Annex 10
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Form

notification of the decision of the working body (service provider)
on the compliance/non-conformity of the investment project

Dear _______________________________________________________

(name of a legal entity or surname, name, patronymic (if any) of an individual)

We inform you about the decision of the working body on the compliance / non-compliance

of the investment project with the conditions of the Rules for subsidizing of reimbursement

of part of the costs incurred by the subject of the agro-industrial complex while investing,

approved by the Order of the Acting Minister of Agriculture of the Republic of Kazakhstan

dated July 23, 2018 № 317

(registered in the Register of state registration of regulatory legal acts № 17320), according

to the project passport

_______________________________________________________________________

(full name of the project passport)

If you have any questions, please contact

_______________________________________________________________________

(working body)

Performer: _______________________________________________ _______________

(surname, name, patronymic (if any)) (signature)

Contact phone numbers: ___________________________________________________

Annex 11
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Form

Notification of the decision of the working body (service provider) to pay/refuse
to pay investment subsidies according to the project passport

Dear _______________________________________________________

(name of a legal entity or surname, name, patronymic (if any)

of an individual)

We inform you about the decision of the working body to pay / refuse to pay investment

subsidies according to the project passport

______________________________________________________________________

(full name of the project passport)

Reasons for refusal:

______________________________________________________________________

If you have any questions, please contact

______________________________________________________________________

(working body)

Performer: ______________________________________________ ___________

(surname, name, patronymic (if any)) (signature)

Contact phone numbers: __________________________________________________

Annex 12
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Investment subsidizing agreement № __

Footnote. Annex 12 as amended by the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160 (shall be enforced upon expiry of ten calendar days after its first official publication).

city _________

"_______________" 20__

State Institution "__________________________________", represented by the head of the department (or his/her substitute person based on the order) ______________________, acting on the basis of the Regulation on the state institution "_____________________________________________", hereinafter referred to as the "Working body", on the first part and__________________________ represented by _____________________, acting on the basis of ___________, hereinafter referred to as the "Investor" on the second part, jointly referred to as the Parties, and individually a Party either as specified above, have made this Investment subsidizing agreement (hereinafter referred to as the Agreement) as follows.

Chapter 1. General provisions

The grounds for entering in this Agreement are:

1) Subsidy Rules for Reimbursement of a Part of the Expenses Incurred by an Agro-Industrial Complex Entity, in the Context of Investments, approved by the Order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated July 23, 2018 № 317 (registered in the Register of state registration of regulatory legal acts № 17320) (hereinafter referred to as the Subsidy Rules);

2) Decision of the working body № ___ dated ______ 20___.

Chapter 2. Terms and definitions

2. This Agreement uses the terms specified in the Subsidy Rules.

Chapter 3. Subject matter of the Agreement

3.1 According to the terms of this Agreement, the Working body shall provide investment subsidization of a part of the Investor's expenses under the following conditions:

Project passport (according to the Subsidy Rules)
Total amount of the Investor's investments under the investment project
Amount of investment subsidies
Number of the decision of the working body
Date of the decision of the working body

3.2 Investment subsidies shall be made at the expense and within the limits of funds provided for in the budget of _______________ region (city of republican significance, capital) for the relevant fiscal year.

Chapter 4. Procedure and conditions for transferring funds to the Investor

4.1 The amount of investment subsidies in the amount of __________ (______) tenge shall be transferred by the Working Body to the Investor's settlement account when the Investor uses its own funds or shall be transferred by the Working Body to a financial institution by the Working Body to repay the Investor's principal debt when acquiring machinery, equipment and other facilities on credit/lease basis.

4.2 The countdown of the investment subsidy period begins from the moment this Agreement enters into force.

4.3 The Parties, within the framework of this Agreement, have agreed that if the day of payment falls on a non-working day or a holiday, the payment shall be made on the next working day

4.4 Investment subsidies shall be paid to the Investor in accordance with the project passports specified in the Rules for subsidizing.

4.5 Investment subsidies shall be paid on the Investor's investment in purchasing new, previously unused vehicles, machinery and equipment.

4.6. All transactions shall be carried out in the national currency - tenge.

Chapter 5. Rights and obligations of the Parties

5.1 The Investor shall have the right to:

use vehicles, machines and equipment for other types of activities in case of seasonal downtime, subject to prior written notification to the Working Body.

5.2 The Investor shall be obliged to:

timely and fully fulfill the terms and conditions of the Subsidy Rules;

timely and fully fulfill its obligations under the Agreement;

timely provide, upon request of the Working Body, documents and information related to the fulfillment of this Agreement;

provide the Working body with access for inspection of the Investor's facility and certification that the capacity utilization has been achieved;

in case of commencement of the procedure of its liquidation, rehabilitation or bankruptcy, as well as if the Investor's activity is suspended in accordance with the current legislation of the Republic of Kazakhstan, immediately inform the Working Body in writing;

not to transfer or disclose information on the terms and implementation of this Contract to third parties without prior written consent of the Parties;

timely notify the Working Body of all circumstances that may affect the fulfillment of the terms and conditions of this Contract.

5.3 Working Body shall have the right to:

request from the Investor all necessary documents and information about the progress of the investment project and this Agreement.

5.4 Working Body shall be obliged to:

to transfer the funds provided for investment subsidization specified in paragraph 3.1 of this Agreement;

carry out monitoring in accordance with paragraph 38 of the Rules.

Chapter 6. Liability of the Parties

6.1 The Parties hereunder shall be liable for non-fulfillment and/or improper fulfillment of obligations arising from the Contract in accordance with the Contract, Subsidization Rules and the legislation of the Republic of Kazakhstan.

Chapter 7. Term of the Agreement

7.1 This Agreement shall come into force upon its signing and shall remain in full force and effect until the Parties have fully performed their obligations hereunder.

Chapter 8. Force majeure circumstances

8.1 The Parties shall be released from liability for non-performance or improper performance of their obligations under this Agreement, if the impossibility of performance was caused by force majeure circumstances.

8.2 Upon occurrence of force majeure circumstances, the Party for which it is impossible to fulfill its obligations under this Agreement shall timely notify the other Party of such circumstances within 10 (ten) working days from the moment of their occurrence. In this case, the nature, period of validity, the fact of occurrence of force majeure circumstances shall be confirmed by the relevant documents of the authorized state bodies.

8.3 3 In the absence of timely notification, a Party shall be obliged to compensate the other Party for the damage caused by failure to notify or untimely notification.

8.4 The occurrence of force majeure circumstances shall entail an increase in the term of performance of this Agreement for the period of their effect.

8.5 If such circumstances continue for more than three consecutive months, either Party shall have the right to refuse further performance of its obligations under this Agreement у.

Chapter 9. Settlement of disputes

9.1 The Parties shall make every effort to resolve, through direct negotiations, all disagreements or disputes arising between them under or in connection with the Agreement.

9.2 If, after such negotiations, the Parties are unable to resolve a dispute under this Agreement, either Party may request that this issue be resolved in court, as established by the legislation of the Republic of Kazakhstan.

Chapter 10. Exchange of correspondence

10.1 Any correspondence sent by the Parties to each other under this Agreement shall be submitted in writing and reviewed within 10 (ten) calendar days from the date of receipt by the Parties of the correspondence with a delivery mark.

10.2 Correspondence shall be deemed to have been submitted or sent when it is properly executed (correspondence is submitted on a letterhead or sealed (if any), signed by the manager and has a registration number, date), delivered in person, delivered by mail (registered letter with notification) or courier service to the address of the respective Party.

Chapter 11. Confidentiality

11.1 The Parties hereby agree that information concerning the terms of this Agreement, banking secrecy, as well as financial, commercial and other information received by them during the conclusion and execution of this Agreement, is confidential and is not subject to disclosure to third parties except in cases expressly provided for in this Agreement, the Subsidy Rules and the current legislation of the Republic of Kazakhstan..

11.2 Transfer of confidential information to third parties, its publication or other disclosure by the Party shall be possible in cases expressly provided for by this Agreement and the legislation of the Republic of Kazakhstan.

11.3 The Parties shall take all necessary measures, including legal ones, to maintain the confidentiality of the existence and terms of this Agreement. Officials and employees of the Parties shall not disclose or transfer to third parties information received during the implementation of this Agreement.

11.4 In the event of disclosure or distribution by either Party of confidential information in violation of the requirements of this Agreement, the guilty Party shall bear liability provided for by the legislation of the Republic of Kazakhstan, with compensation for possible damage incurred by the other Party as a result of the disclosure of such information.

11.5 By signing this Agreement, the Investor provides consent to the Working Body to place information about the Investor in the media, as well as to disclose any information (including banking secrets) received about the Investor within the framework of this Agreement to third parties without the prior written consent of the Investor.

Глава 12. Declarations, warranties and consents

12.1 The Investor hereby declares and warrants as follows:

The Investor confirms that the declarations and warranties stated in this Agreement are true and correct.

12.2 The Investor represents and warrants that:

the Investor is not aware of any circumstances that may have an adverse effect on its business, its financial position, its assets and its ability to meet its liabilities;

The Investor also confirms that its competence allows the person who signs this Agreement to conclude this Agreement.

12.3 The Investor confirms that at the time of conclusion of this Agreement there are no grounds that could serve as a reason for termination of this Agreement or recognition of it as invalid.

12.4 The investor declares and confirms that all information, as well as all documentation transferred (provided) is accurate and true.

Chapter 13. Final provisions

13.1 The provisions of this Agreement are subject to change and/or addition. Only those changes and additions that are drawn up by agreement of the Parties in writing and signed by authorized representatives of the Parties are recognized as valid and binding for the Parties.

13.2 This Agreement is drawn up in 2 (two) copies in the Kazakh and Russian languages, one copy for each of the Parties.

Chapter 14. Legal addresses, bank details and signatures of the Parties

Working Body:	Investor:

________________	________________

Annex 13
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Agreement on the targeted use and non-alienation of investment subsidy objects № ___

Footnote. Appendix 13 is in the wording of the Order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

The Administration of ________________________________________________________

(name) of ___________________________________________________________________

region (city of republican significance, capital)

of the Republic of Kazakhstan, represented by the head (or the person replacing him/her)

_________________________________________________________________

acting on the basis of _____________dated № ____,

hereinafter referred to as the "Working body", on the one hand,

and ______________________________ represented by _____________________________,

acting on the basis of ___________________________________________

hereinafter referred to as the "Investor", on the other hand, jointly referred to as the Parties, and individually a Party or as specified above, have entered into this Agreement on the targeted use and non-alienation of investment subsidy objects for 3 (three) years from the date of subsidization (hereinafter - the Agreement), as follows:

1. Subject and purpose of the Agreement

1.1 The Investor hereby shall undertake to use the investment subsidized objects strictly for their intended purpose and not to alienate, replace, or lease them, and to bear responsibility for any misuse for a period of 3 (three) years from the date of subsidization.

1.2 In the event of any contradictions within the framework of this Agreement, the Law of the Republic of Kazakhstan “On state regulation of the development of the agro-industrial complex and rural areas” shall prevail.

Chapter 2. Rights and obligations of the Parties

2.1 The investor shall be obliged:

to fulfill its obligations under the Agreement in a timely manner and in full;

to promptly provide, upon request of the Working body, the documents and information related to the implementation of this Agreement;

to provide the Working body with access to inspect the investor’s facility;

to provide information in accordance with paragraph 39 of the Rules;

not to transfer or disclose information about the terms and implementation of this Agreement to third parties without the prior written consent of the Parties;

not to alienate, replace, or lease investment subsidy objects during the period specified in subparagraph 1.1 of the Agreement;

2.2 The working body shall have the right to:

request from the Investor all necessary documents and information regarding the progress of the investment project and this Agreement and the subsidies Rules.

Chapter 3. Term of the Agreement

3.1 This Agreement shall enter into force on the date of its signing by the Parties and shall be valid for 3 (three) years, and in terms of unfulfilled obligations – until their full fulfilment.

Chapter 4. Force majeure

4.1 The Parties shall be released from liability for failure to perform or improper performance of their obligations under this Agreement if the impossibility of performance was a consequence of force majeure circumstances.

4.2 In the event of a force majeure circumstance, the Party unable to fulfill its obligations under this Agreement must promptly notify the other Party of such circumstance within 10 (ten) business days of its occurrence. The nature, duration, and occurrence of the force majeure circumstance must be confirmed by relevant documents from authorized state bodies.

4.3 In the absence of timely notification, the Party shall be obliged to compensate the other Party for damage caused by failure to notify or untimely notification.

4.4 The occurrence of force majeure circumstances shall entail an extension of the period of execution of this Agreement for the period of their validity.

4.5 If such circumstances continue for more than three months in a row, then either Party shall have the right to refuse further performance of obligations under this Agreement.

Chapter 5. Final provisions

5.1 Correspondence is considered to be submitted or sent when it is presented on letterhead or sealed (if any), signed by the head and has a registration number, date, delivered in person, delivered by mail (registered letter with notification) or courier service to the address of the participating Party.

5.2 Any change or termination of the terms of this Agreement, including the term of this Agreement, shall be formalized by an additional agreement of the Parties signed by authorized representatives of the Parties, unless otherwise provided by this Agreement.

5.3 All disagreements or disputes arising between the Parties under this Agreement shall be resolved through direct negotiations. If, after such negotiations, the Parties shall be unable to resolve a dispute under this Agreement, either Party may request that the matter be resolved through judicial proceedings established by the legislation of the Republic of Kazakhstan.

5.4 Issues not regulated by this Agreement shall be governed by the investment subsidy Contract dated ____20___ № __, as well as by the legislation of the Republic of Kazakhstan.

5.5 This Agreement is drawn up in 2 (two) copies in the state and Russian languages, one copy for each Party.

Chapter 6. Addresses, bank details and signatures of the Parties

Investor:	Working body:

	Annex 13-1
	to the Subsidy Rules for Reimbursement of a Part of the Expenses Incurred by an Agro-Industrial Complex Entity, in the Context of Investments

Form

Notification
on amendments to the investment subsidizing agreement

Footnote. The Rules were supplemented with Annex 13-1 in accordance with the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated 15.05.2024 № 160 (shall be enforced upon expiry of ten calendar days after its first official publication).

Working body for the issues of investment subsidizing (hereinafter referred to the working body

(service provider)):

_____________________________________________________________________________

(name of the working body (service provider))

Business identification number (hereinafter referred to BIN):

_____________________________________________________________________________

(BIN of the working body (service provider))

Investor: ____________________________________________________________________

(name of investor)

Individual identification number (hereinafter referred to IIN)/BIN:

_____________________________________________________________________________

(IIN/BIN of Investor)

Subsidizing Agreement: № _________________ dated ________________________________

(details)

Hereby the Investor ___________________________________________________________

(name of investor)

represented by _____________________________________________________, within the framework of paragraph 30-1

(surname, name, patronymic (if any))

of the Subsidy rules for reimbursement of part of the costs incurred by the subject of agro-industrial complex in the context of investments, approved by the Order of Acting Minister of Agriculture of the Republic of Kazakhstan dated July 23, 2018 № 317 (registered in the Register of State Registration of Regulatory legal acts № 17320) (hereinafter - Rules), notifies you that under the Investment Subsidizing Agreement ___________, previously approved for participation in the program

(details)

subsidies for reimbursement of part of the costs incurred by the subject of agro-industrial complex in the context of investments it is necessary according to paragraph 2 of Article 235 of the Civil Code of the Republic of Kazakhstan the replacement of investor due to accession of ______________________________________________________ to the heirship

(name of a new investor and BIN/IIN)

for the property of ___________________________________________________________.

(name of the initial investor and BIN/IIN)

In this connection, we request to amend the investment subsidy agreement in terms of changing the investor's data. At the same time, we confirm that the subsidy conditions remain on the same terms without increasing the previously approved amount of subsidies for the period from the date of the decision of the working body (service provider) to approve the application for investment subsidy.

The notification shall be sent for consideration for decision making.

We confirm the reliability of the submitted information, are aware of the responsibility for submission of inaccurate information in accordance with the legislation of the Republic of Kazakhstan and, with the consent of the borrower (service recipient), consent to the use of information constituting a legally protected secret, as well as to the collection, processing, storage, uploading and use of personal data and other information.

Investor:

Signed at 00:00:00 01.01.2023;

Data from electronic digital signature (hereinafter referred to as EDS):

Name: ____________ "________________"

(organizational form and name)

BIN: _________________

Surname, name, patronymic (if any): ________________

E-mail: ____@___

EDS is issued by: National Certification Center (GOST)

Certificate validity period:

01.01.2023 00:00:00 - 01.01.2024 00:00:00

Annex 14
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Agreement and contract № __ on the non-use
of investment subsidies in a special account by a financial institution licensed by the authorized body for regulation, control
and supervision of the financial market and financial organizations to conduct banking operations, or by a financial institution licensed
to carry out microfinance activities or by the Industrial Development Fund joint-stock company

Footnote. Appendix 14 is in the wording of Order of the Minister of Agriculture of the Republic of Kazakhstan dated 13.06.2025, № 198 (shall be enforced upon expiry of ten calendar days after the date of its first official publication).

city __________ "__ _"_ _________ 20__

___________________________________________________________________

hereinafter referred to as the "Financial institution",

on the one hand, the state institution of the

___________________________________________________________________

region (city of republican significance, capital (name),

represented by the head (or the person replacing him/her on the basis of the order)

___________________________________________________________________,

acting on the basis of the regulations on the state institution,

hereinafter referred to as the "Working body", on the other hand,

___________________________________________________________________,

represented by _____________________________________________________________,

acting on the basis of the Charter, hereinafter referred to as the "Investor",

on the third party, jointly referred to as the Parties, and individually a Party,

have entered into this Contract and an agreement on non-use of funds

in a special account by the financial institution

(hereinafter- the Contract) as follows.

Chapter 1. General provisions

1.1. The grounds for concluding this Contract shall be:

1) Law of the Republic of Kazakhstan “On state regulation of the development of the agro-industrial complex and rural areas”;

2) Rules for subsidizing the reimbursement of the expenses part incurred by an entity in the agro-industrial complex for investments, approved by the order of the Acting Minister of Agriculture of the Republic of Kazakhstan dated July 23, 2018 № 317 (registered in the Register of state registration of regulatory legal acts № 17320) (hereinafter - the subsidizing Rules);

3) Decision of the working body on investment subsidies (dated __________20__, № ___).

Chapter 2. Terms and Definitions

2.1. This Contract uses the concepts specified in the Subsidy rules.

Chapter 3. Subject of the Contract

3.1. The financial institution shall not use the funds in the special account until the Working body has made a decision on the payment of investment subsidies, in accordance with the conditions specified in the subsidy Rules.

3.2. To receive investment subsidies to a special account, the investor, along with the documents specified in the subsidy Rules, shall additionally provide a certified copy of the positive decision of the credit committee of the financial institution, a loan agreement/leasing agreement with the financial institution.

Chapter 4. Procedure and conditions for transferring investment subsidies

4.1. The amount of investment subsidies in the amount of ______ (___________) tenge shall be transferred by the Working body to the special account of the financial institution as an advance payment.

Details of the special account of the financial institution: _____________

4.2. All transactions shall be carried out in the national currency – tenge.

Chapter 5. Rights and obligations of the parties

5.1. The Financial institution, within 10 (ten) business days from the date of receipt of funds to a special account, shall transfer the funds stipulated by the credit contract (concluded between the Financial institution and the Investor) to the account of the equipment seller, unless otherwise provided by the contract between the investor and the financial institution, and provide supporting documents to the working body.

5.2. If the financial institution fails to comply with the conditions stipulated in the subsidy Rules, the financial institution shall, within 3 (three) business days, fully restore the investment subsidies transferred by the working body as an advance payment to a special account.

5.3. Payments made in the current financial year shall be refunded by restoring the operating body's cash expenses by increasing the amount of unfulfilled obligations and reducing cash expenses according to the corresponding budget classification codes. In the event of a refund of payments from previous years, the refund amount shall be credited to the revenue of the relevant budget from which the payments were made.

5.4. Funds transferred to a special account shall be credited by the financial institution to the repayment of the investor's principal debt on a loan/lease used to purchase equipment and machinery within the framework of an investment project based on a positive decision of the working body to provide the investor with an investment subsidy.

Chapter 6. Liability of the Parties

6.1. The Parties to this Contract shall be liable for failure to perform and/or improper performance of obligations arising from this Contract in accordance with this Contract and the legislation of the Republic of Kazakhstan.

Chapter 7. Term of the Contract

7.1. This Contract shall enter into force upon its signing and shall remain in effect until the Parties have fulfilled their obligations in full and in a timely manner, in accordance with the subsidy Rules.

Chapter 8. Force Majeure

8.1. The Parties shall be released from liability for failure to perform or improper performance of their obligations under this Contract if the impossibility of performance was a consequence of force majeure.

8.2. If a force majeure circumstance occurs, the Party unable to fulfill its obligations under this Contract shall notify the other Party of such circumstances within 10 (ten) business days of the occurrence. The nature, duration, and occurrence of the force majeure circumstance shall be confirmed by relevant documents from authorized state bodies.

8.3. In the absence of timely notification, the Party shall compensate the other Party for damage caused by failure to notify or untimely notification.

8.4. The occurrence of force majeure circumstances shall cause an extension of the term for the performance of this Contract for the period of their validity.

8.5. If such circumstances continue for more than 3 (three) months in a row, then either Party shall have the right to refuse further performance of obligations under this Contract.

Chapter 9. Disputes resolution

9.1. The Parties shall make every effort to resolve through direct negotiations all disagreements or disputes arising between them under or in connection with the Contract.

9.2. If, after such negotiations, the Parties are unable to resolve a dispute under the Contract, either Party may request that this issue be resolved in court in accordance with the legislation of the Republic of Kazakhstan.

Chapter 10. Exchange of correspondence

10.1. Any correspondence sent by the Parties to each other within the framework of this Contract shall be submitted in writing and shall be reviewed within 10 (ten) calendar days from the date of receipt by the Parties of the correspondence with a delivery mark.

10.2. Correspondence is considered to be submitted or sent when it is properly executed (correspondence is submitted on letterhead or sealed (if any), signed by the head and has a registration number and date), delivered in person, or delivered by mail (registered letter with notification) or courier service to the address of the participating Party.

Chapter 11. Confidentiality

11.1. The Parties hereby agree that information relating to the terms of this Contract, banking secrecy, as well as financial, commercial and other information received by them during the conclusion and execution of this Contract, shall be confidential and shall not be disclosed to third parties except in cases expressly provided for in this Contract and the current legislation of the Republic of Kazakhstan.

11.2. The transfer of confidential information to third parties, its publication or other disclosure by a Party is possible in cases expressly provided for by this Contract and the legislation of the Republic of Kazakhstan.

11.3. The Parties shall take all necessary measures, including legal ones, to maintain the confidentiality of the existence and terms of this Contract. Officials and employees of the Parties shall be prohibited from disclosing or transferring to third parties any information obtained during the implementation of this Contract.

11.4. In the event of disclosure or dissemination by either Party of confidential information in violation of the requirements of this Contract, the guilty Party shall bear liability as provided for by the legislation of the Republic of Kazakhstan, with compensation for any damage incurred by the other Party as a result of the disclosure of such information.

11.5. By signing this Contract, the Investor grants consent to the working body to publish information about the Investor in the media, as well as to disclose any information (including banking secrets) received about the Investor within the framework of this Contract to third parties without the prior written consent of the Investor.

Chapter 12. Final provisions

12.1. The provisions of this Contract shall be subject to amendment and/or supplementation. Only those amendments and supplements that are agreed upon in writing and signed by authorized representatives of the Parties shall be valid and binding on the Parties.

12.2. This Agreement is drawn up in 3 (three) copies in the state and Russian languages, one copy for each Party.

Working body:	Financial institution:	Investor:

Annex 15
to the Rules of subsidizing
on compensation of a part
of expenses incurred by
the subject of agro-industrial
complex in case of investments

Form

Form, for collection of administrative data

To be submitted: to the Ministry of Agriculture of the Republic of Kazakhstan of form of administrative data is place on the Internet resource www.gov.kz

Report on the development of subsidies for reimbursement of part of the expenses
incurred by the subject of agro-industrial complex in the course of investment investments

Index of the form of administrative data: form № 1-ИС

Frequency: quarterly, annually

Reporting period: ___ quarter 20___, 20___ year

The range of persons submitting the form: structural subdivision of the local executive body of the oblast, city of republican significance and capital city, realizing functions in the field of agriculture

Deadline for submitting the administrative data form: quarterly, before the fifth day of the month following the reporting quarter, and annually, before the tenth January of the calendar year.

item №	Name of investor	Individual identification number / business identitication number of investor	Parameters of project
			Parameters of project	Production indicators (production capacity)
				Current	when reaching the design capacity
				in physical terms, тонн	in value terms, thousand tenge	in physical terms, тонн	in value terms, thousand tenge
1	2	3	4	5	6	7	8

Table continued

Number of permanent jobs	Total project cost thousand tenge		Compensation share, percentage	The amount of subsidies paid, thousand tenge	Commissioning date, day / month / year	Date and number of the decision of the working body, day / month / year
Number of permanent jobs	total	Including subject to subsidizing	Compensation share, percentage	The amount of subsidies paid, thousand tenge	Commissioning date, day / month / year
9	10	11	12	13	14	15

Name _______________________________________________________

Address ______________________________________________________________

Phone number ____________________________________________________________

E-mail: _____________________________________________

Performer ________________________________________________________

(surname, name, patronymic (if any), signature)

The head or a person, performing his duties __________________________________________________ _________________

(surname, name, patronymic (if any)) (signature)

The first head of the administrator of budget programs of the lower budget _____________________________________________ ______________

(surname, name, patronymic (if any)) (signature)

Stamp here

Date of report submission "___" __________ 20 ___

Explanation on filling in the form designed to collect administrative data
"Report on the development of subsidies for reimbursement of part of the costs incurred
by the subject of the agro-industrial complex in the course of investments" Chapter 1. General provisions

1. This explanation defines uniform requirements for completing the form intended for administrative data collection "Report on the development of subsidies for reimbursement of part of the costs incurred by the subject of the agro-industrial complex in the course of investments" (hereinafter referred to as the Form).

2. Form shall be filled in by the structural subdivision of the local executive body of the region, the city of republican significance and the capital city, realizing functions in the field of agriculture.

3. The Form shall be signed by the executor and the head of the local executive body of the region, city of republican significance and the capital, or by the person acting in his/her capacity.

4. Form shall be submitted to the Ministry of Agriculture of the Republic of Kazakhstan by the structural subdivision of the local executive body of the region, city of republican significance and the capital city, implementing functions in the field of agriculture, quarterly, before the fifth day of the month following the reporting quarter, and annually, before the tenth January of the calendar year.

5. From shall be completed in the Kazakh or Russian languages.

Chapter 2. Explanation on filling in the Form

6. Column 1 of the report indicates the ordinal number.

7. Column 2 indicates the name of the investor.

8. Column 3 indicates individual identification number/business identitication number of the investor.

9. Column 4 indicates the name of the project passport in accordance with Annexes 2 and 3 to the Rules of subsidizing on compensation of a part of expenses incurred by the subject of agro-industrial complex in case of investments, approved by the Order of the Acting Minister of Agriculture of the Republic of Kazakstan dated July 23, 2018 № 317 (registered in the Register of state registration of regulatory legal acts № 17320).

10. Columns 5, 6, 7 and 8 indicate the production capacity of the enterprise on the basis of the investor's statistical form and primary documents confirming the sales of manufactured products by type in physical and value terms.

11. Column 9 indicate the number of permanent jobs.

12. Columns 10 and 11 indicate the total cost of the project, including the amount to be subsidized, shall be indicated.

13. Column 12 indicate the share of reimbursement in accordance with the investment project passport.

14. Column 13 indicate the amount of subsidies paid.

15. Column 14 indicate the date of commissioning of the investment project.

16. Column 15 indicate the date and number of the decision of the working body.

On Approval of the Subsidy Rules for Reimbursement of a Part of the Expenses Incurred by an Agro-Industrial Complex Entity, in the Context of Investments

Rules of subsidizing on compensation of a part of expenses incurred by the subject of agro-industrial complex in case of investments

Chapter 1. General provisions

Chapter 2. Basic conditions of investment subsidies

Chapter 3. Procedure for receiving and reviewing applications for investment subsidies in electronic form

Chapter 4. Separate conditions of investment subsidies for investments at the expense of borrowed funds

Chapter 5. Final provisions

List of project passports

List of project passports eligible for subsidies

Application for investment subsidizing

Application for investment subsidies using the mechanism of advance payment to a special account

Act of inspection of the investor's facility and certification of achieving the capacity utilization dated __________ 20__ №___

Notice of restriction of access by a member of a group of professionals in a state subsidy informational system

List of basic requirements for the provision of the state service "Subsidizing on reimbursement of a part of expenses incurred by the subject of agro-industrial complex in the course of investment investments"

Coefficients for conversion of livestock of farm animals into a conventional head of cattle

notification of the decision of the working body (service provider) on the compliance/non-conformity of the investment project

Notification of the decision of the working body (service provider) to pay/refuse to pay investment subsidies according to the project passport

Investment subsidizing agreement № __

Chapter 1. General provisions

Chapter 2. Terms and definitions

Chapter 3. Subject matter of the Agreement

Chapter 4. Procedure and conditions for transferring funds to the Investor

Chapter 5. Rights and obligations of the Parties

Chapter 6. Liability of the Parties

Chapter 7. Term of the Agreement

Chapter 8. Force majeure circumstances

Chapter 9. Settlement of disputes

Chapter 10. Exchange of correspondence

Chapter 11. Confidentiality

Глава 12. Declarations, warranties and consents

Chapter 13. Final provisions

Chapter 14. Legal addresses, bank details and signatures of the Parties

Agreement on the targeted use and non-alienation of investment subsidy objects № ___

1. Subject and purpose of the Agreement

Chapter 2. Rights and obligations of the Parties

Chapter 3. Term of the Agreement

Chapter 4. Force majeure

Chapter 5. Final provisions

Chapter 6. Addresses, bank details and signatures of the Parties

Notificationon amendments to the investment subsidizing agreement

Chapter 1. General provisions

Chapter 2. Terms and Definitions

Chapter 3. Subject of the Contract

Chapter 4. Procedure and conditions for transferring investment subsidies

Chapter 5. Rights and obligations of the parties

Chapter 6. Liability of the Parties

Chapter 7. Term of the Contract

Chapter 8. Force Majeure

Chapter 9. Disputes resolution

Chapter 10. Exchange of correspondence

Chapter 11. Confidentiality

Chapter 12. Final provisions

Form, for collection of administrative data

Report on the development of subsidies for reimbursement of part of the expenses incurred by the subject of agro-industrial complex in the course of investment investments

Explanation on filling in the form designed to collect administrative data "Report on the development of subsidies for reimbursement of part of the costs incurred by the subject of the agro-industrial complex in the course of investments" Chapter 1. General provisions

Chapter 2. Explanation on filling in the Form

Database status

Ministry of Justice of the Republic of Kazakhstan law information services

Support

Recent documents

Popular documents

Application
for investment subsidies using the mechanism of advance payment to a special account

Act of inspection of the investor's facility and certification
of achieving the capacity utilization dated ______ 20 №_

Notice of restriction of access by a member of a group
of professionals in a state subsidy informational system

List of basic requirements for the provision of the state service "Subsidizing on reimbursement of a part of expenses incurred by the subject
of agro-industrial complex in the course of investment investments"

notification of the decision of the working body (service provider)
on the compliance/non-conformity of the investment project

Notification of the decision of the working body (service provider) to pay/refuse
to pay investment subsidies according to the project passport

Notification
on amendments to the investment subsidizing agreement

Report on the development of subsidies for reimbursement of part of the expenses
incurred by the subject of agro-industrial complex in the course of investment investments

Explanation on filling in the form designed to collect administrative data
"Report on the development of subsidies for reimbursement of part of the costs incurred
by the subject of the agro-industrial complex in the course of investments" Chapter 1. General provisions